Question Is it ok to bend my sata power cable like this?

eh its fine. Obviously sharp bends have to potential to eventually damage any cable/plug, but modern PSU's are pretty sturdy.
You've already installed it, I wouldn't worry about it too much as long as the pressure isn't going to make either of those plugs wiggle loose.
 

ex_bubblehead

Champion
Moderator
Judging by the rather large angle assumed by the plug on the left there's a considerable amount of pressure on both the plug and connector. This does not bode well for the longevity of either. Use 2 different cables in this instance, and do not fold the wire in between the drives.
 
Aug 6, 2021
10
0
20
0
Judging by the rather large angle assumed by the plug on the left there's a considerable amount of pressure on both the plug and connector. This does not bode well for the longevity of either. Use 2 different cables in this instance, and do not fold the wire in between the drives.
I do not have another cable long enough for the 2 drives
 

ASK THE COMMUNITY