Question Is it risky if pump cables touch the VRM Heatsink ?

[Emma92]

I’m trying to avoid the cables of the pump to touch the heatsink of the VRM (please correct next if this Heatsink is not the one of the VRM). But it’s almost impossible because of the length of the cable. Will this be risky or there is no way the Heatsink will damage those cables?

The forums is not allowing me to upload the picture .

 

[Emma92]

I have to post it as a link I guess

https://imgur.com/JYwyXpb

View: https://imgur.com/JYwyXpb

 

[vMax]

I have a very similar setup with the Corsair H150i pro and to be honest, you will have no issues....but you should be able to move the cable. Okay I have gone a bit mental on RGB but you should be able to see my cable.

https://imgur.com/oGoRKWk

View: https://i.imgur.com/oGoRKWk.jpg

 

[Emma92]

I have a very similar setup with the Corsair H150i pro and to be honest, you will have no issues....but you should be able to move the cable. Okay I have gone a bit mental on RGB but you should be able to see my cable.

https://imgur.com/oGoRKWk

View: https://i.imgur.com/oGoRKWk.jpg

My cables come from the top of the pump, guess the two models are differents. Thanks tho, I will try to fix them a little like that

 

[vMax]

My cables come from the top of the pump, guess the two models are differents. Thanks tho, I will try to fix them a little like that

No problems at all and even if you cannot move it, it should be fine.

 

[Emma92]

No problems at all and even if you cannot move it, it should be fine.

Thanks. My previous build didn’t have such a big heatsink there so I was a little worried. They were just slightly touching, I was able to put them 2mm away from the Heatsink now.

 

[vMax]

Thanks. My previous build didn’t have such a big heatsink there so I was a little worried. They were just slightly touching, I was able to put them 2mm away from the Heatsink now.

That should be more than fine.