Hi!
I just wondered if anyone could advise me? I had a problem with a file, which I managed to delete, but this made me run a chkdsk. It is a laptop with an internal SSD for Windows and internal HDD for data - and it is the data drive which I am concerned about.
Here is the chkdsk report.
I was searching online, and saw someone say I should also do a GSmartControl report to see what the drive says about itself. This came up with various errors, but I'm not sure how to read the test results. It said 'ATA Error Count: 1334' in the error log, has several lines that say 'pre-failure' and the rest 'old age' in the attributes tab and does have a 'read failure' under self-test logs. However overall it says the drive has passed. Therefore I'm not sure how serious or not these issues are.
I do have backups of my data, but I normally only keep the last couple of full-drive backups, and I'm concerned that if data starts getting corrupted that I'll be backing up corrupt files.
Any advice is greatly appreciated. Thanks for your time.
I just wondered if anyone could advise me? I had a problem with a file, which I managed to delete, but this made me run a chkdsk. It is a laptop with an internal SSD for Windows and internal HDD for data - and it is the data drive which I am concerned about.
Here is the chkdsk report.
I was searching online, and saw someone say I should also do a GSmartControl report to see what the drive says about itself. This came up with various errors, but I'm not sure how to read the test results. It said 'ATA Error Count: 1334' in the error log, has several lines that say 'pre-failure' and the rest 'old age' in the attributes tab and does have a 'read failure' under self-test logs. However overall it says the drive has passed. Therefore I'm not sure how serious or not these issues are.
I do have backups of my data, but I normally only keep the last couple of full-drive backups, and I'm concerned that if data starts getting corrupted that I'll be backing up corrupt files.
Code:
smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-win8(64)] (sf-5.43-1)
Copyright (C) 2002-12 by Bruce Allen, [url=http://smartmontools.sourceforge.net]http://smartmontools.sourceforge.net[/url]
=== START OF INFORMATION SECTION ===
Device Model: HGST HTS721010A9E630
Serial Number: JR1000D33AB68E
LU WWN Device Id: 5 000cca 8c8eefc46
Firmware Version: JB0OA3T0
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Thu Sep 10 21:28:33 2020 GMTST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 173) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 086 062 Pre-fail Always - 65536
2 Throughput_Performance 0x0025 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0023 253 100 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 9108
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 8 (0 1)
7 Seek_Error_Rate 0x002f 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 080 080 000 Old_age Always - 9176
10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2862
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 001 000 Old_age Always - 138113263535414
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 059 049 045 Old_age Always - 41 (Min/Max 31/41)
191 G-Sense_Error_Rate 0x0032 095 095 000 Old_age Always - 1337
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1441814
193 Load_Cycle_Count 0x0032 039 039 000 Old_age Always - 619477
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 40
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 0
223 Load_Retry_Count 0x002a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 1334 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1334 occurred at disk power-on lifetime: 9162 hours (381 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 b4 6c dd 04 Error: UNC at LBA = 0x04dd6cb4 = 81620148
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 04 b4 6c dd 40 00 05:16:12.472 READ VERIFY SECTOR(S) EXT
b0 d0 00 00 4f c2 40 00 05:16:12.471 SMART READ DATA
42 00 04 b0 6c dd 40 00 05:16:09.588 READ VERIFY SECTOR(S) EXT
b0 da 00 00 4f c2 40 00 05:16:09.587 SMART RETURN STATUS
42 00 08 d8 6c dd 40 00 05:16:06.730 READ VERIFY SECTOR(S) EXT
Error 1333 occurred at disk power-on lifetime: 9162 hours (381 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 b0 6c dd 04 Error: UNC at LBA = 0x04dd6cb0 = 81620144
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 04 b0 6c dd 40 00 05:16:09.588 READ VERIFY SECTOR(S) EXT
b0 da 00 00 4f c2 40 00 05:16:09.587 SMART RETURN STATUS
42 00 08 d8 6c dd 40 00 05:16:06.730 READ VERIFY SECTOR(S) EXT
42 00 08 d0 6c dd 40 00 05:16:06.712 READ VERIFY SECTOR(S) EXT
42 00 08 c8 6c dd 40 00 05:16:03.839 READ VERIFY SECTOR(S) EXT
Error 1332 occurred at disk power-on lifetime: 9162 hours (381 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 d8 6c dd 04 Error: UNC at LBA = 0x04dd6cd8 = 81620184
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 08 d8 6c dd 40 00 05:16:06.730 READ VERIFY SECTOR(S) EXT
42 00 08 d0 6c dd 40 00 05:16:06.712 READ VERIFY SECTOR(S) EXT
42 00 08 c8 6c dd 40 00 05:16:03.839 READ VERIFY SECTOR(S) EXT
b0 d0 00 00 4f c2 40 00 05:16:03.837 SMART READ DATA
42 00 08 c0 6c dd 40 00 05:16:00.963 READ VERIFY SECTOR(S) EXT
Error 1331 occurred at disk power-on lifetime: 9162 hours (381 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c8 6c dd 04 Error: UNC at LBA = 0x04dd6cc8 = 81620168
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 08 c8 6c dd 40 00 05:16:03.839 READ VERIFY SECTOR(S) EXT
b0 d0 00 00 4f c2 40 00 05:16:03.837 SMART READ DATA
42 00 08 c0 6c dd 40 00 05:16:00.963 READ VERIFY SECTOR(S) EXT
b0 da 00 00 4f c2 40 00 05:16:00.962 SMART RETURN STATUS
42 00 08 b8 6c dd 40 00 05:15:58.096 READ VERIFY SECTOR(S) EXT
Error 1330 occurred at disk power-on lifetime: 9162 hours (381 days + 18 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 6c dd 04 Error: UNC at LBA = 0x04dd6cc0 = 81620160
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 08 c0 6c dd 40 00 05:16:00.963 READ VERIFY SECTOR(S) EXT
b0 da 00 00 4f c2 40 00 05:16:00.962 SMART RETURN STATUS
42 00 08 b8 6c dd 40 00 05:15:58.096 READ VERIFY SECTOR(S) EXT
42 00 08 b0 6c dd 40 00 05:15:55.231 READ VERIFY SECTOR(S) EXT
42 00 10 e0 6c dd 40 00 05:15:55.189 READ VERIFY SECTOR(S) EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 9176 81620148
# 2 Short offline Completed: read failure 90% 9176 81620148
# 3 Short offline Completed without error 00% 8514 -
# 4 Short offline Completed without error 00% 8513 -
# 5 Short offline Completed without error 00% 8507 -
# 6 Short offline Completed without error 00% 8506 -
# 7 Short offline Completed without error 00% 8505 -
# 8 Short offline Completed without error 00% 8504 -
# 9 Short offline Completed without error 00% 8503 -
#10 Short offline Completed without error 00% 8502 -
#11 Short offline Completed without error 00% 8497 -
#12 Short offline Completed without error 00% 8496 -
#13 Short offline Completed without error 00% 8495 -
#14 Short offline Completed without error 00% 8494 -
#15 Short offline Completed without error 00% 8493 -
#16 Short offline Completed without error 00% 8492 -
#17 Short offline Completed without error 00% 8491 -
#18 Short offline Completed without error 00% 8490 -
#19 Short offline Aborted by host 10% 8490 -
#20 Short offline Completed without error 00% 8488 -
#21 Short offline Completed without error 00% 8483 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Any advice is greatly appreciated. Thanks for your time.