I did some cable management on my setup and reassembled basically everything. After I was finished, I tried to get my PC working again but to no avail. I tried reconnecting the displayport cable again to the GPU and my monitor, turning the monitor on and off while simultaneously checking if my PC was going to boot. (Both my PC and my monitor were visibly on and working fine, before the following happaned to my monitor: )
While I was checking for loose cables, I found out that the displayport to monitor was loose and when I pushed it in a bit more, I heard a click and the monitor's lights went off. After that the monitor showed no signs of life whatsoever. (My monitor is the Acer Predator XB272bmiprz.)
PC Specs:
Intel Core i7 5960x
Asrock Fatility X99 Professional 3.1
Asus ROG GTX 980 Ti Matrix
32GB of Corsair Vengeance RAM
Corsair Hydro H100
OCZ 256GB M.2 SSD
Seagate Baracudda 2TB HDD
While I was checking for loose cables, I found out that the displayport to monitor was loose and when I pushed it in a bit more, I heard a click and the monitor's lights went off. After that the monitor showed no signs of life whatsoever. (My monitor is the Acer Predator XB272bmiprz.)
PC Specs:
Intel Core i7 5960x
Asrock Fatility X99 Professional 3.1
Asus ROG GTX 980 Ti Matrix
32GB of Corsair Vengeance RAM
Corsair Hydro H100
OCZ 256GB M.2 SSD
Seagate Baracudda 2TB HDD