Is my temp all right??

Lkx

Distinguished
Feb 8, 2009
4
0
18,510
I'm using a P5KPL-1600 with 8400 unclocked with OCZ Vendetta 2 cooler, Palit Radeon HD 4670, OCZ PC2-6400 SLI-Ready 800MHz 4GB Kit (2x2GB) and with Gigabyte 750W PSU in Asustek TA-M11.

Winbond W83627DHG hardware monitor

Voltage sensor 0 1.11 Volts [0x8B] (CPU VCORE)
Voltage sensor 1 12.66 Volts [0xE3] (+12V)
Voltage sensor 2 3.28 Volts [0xCD] (AVCC)
Voltage sensor 3 3.28 Volts [0xCD] (+3.3V)
Voltage sensor 4 1.22 Volts [0x99] (VIN1)
Voltage sensor 5 4.75 Volts [0xC6] (+5V)
Voltage sensor 6 1.25 Volts [0x9C] (VIN3)
Temperature sensor 0 36°C (96°F) [0x24] (SYSTIN)
Temperature sensor 1 36°C (96°F) [0x48] (CPUTIN)
Temperature sensor 2 36°C (95°F) [0x47] (AUXTIN)
Fan sensor 0 1885 RPM [0xB3] (SYSFANIN)
Fan sensor 1 1795 RPM [0xBC] (CPUFANIN0)
Fan sensor 2 1055 RPM [0xA0] (AUXFANIN0)

Hardware monitor
-----------------------------------------------------

Intel Core 2 Duo E8400 hardware monitor

Temperature sensor 0 36°C (96°F) [0x40] (Core #0)
Temperature sensor 1 36°C (96°F) [0x40] (Core #1)

Dump hardware monitor



Hardware monitor
-----------------------------------------------------

ATI Radeon HD 4670 hardware monitor

Temperature sensor 0 38°C (100°F) [0x26] (GPU Core)

Dump hardware monitor



Hardware monitor
-----------------------------------------------------

Hitachi HDT721016SLA380 hardware monitor

Temperature sensor 0 41°C (105°F) [0x29] (HDD)

Dump hardware monitor


Processors Map
------------------------------------------------------------------------------------

Number of processors 1
Number of threads 2

Processor 0
-- Core 0
-- Thread 0
-- Core 1
-- Thread 0


Processors Information
------------------------------------------------------------------------------------

Processor 1 (ID = 0)
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Core 2 Duo E8400
Codename Wolfdale
Specification Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
Package Socket 775 LGA (platform ID = 0h)
CPUID 6.7.A
Extended CPUID 6.17
Core Stepping E0
Technology 45 nm
Core Speed 1998.3 MHz (6.0 x 333.0 MHz)
Rated Bus speed 1332.2 MHz
Stock frequency 3000 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 6144 KBytes, 24-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 9.0x
max VID 1.250 V
Features XD, VT
 

Cache

Distinguished
Jan 15, 2009
152
0
18,680


Your temps are fine, all across the board.
 

Lkx

Distinguished
Feb 8, 2009
4
0
18,510
but shouldn't it be lower, cause of the change of CPU cooler. When I use e stock cooler it was about e same temperature. That's is why i'm wondering did I didn't get it fix well?
 

OMGiTzzFATAL

Distinguished
Oct 10, 2008
110
0
18,680
You won't see alot of differance between the two coolers at idle, You should see alot more differance under load + you might have to wait for the thermal paste to set (depending on what sort you put on).

Sometimes people don't put on the correct amount of thermal paste, Some people think its best to apply all of it. However its just to fill in the scratches and gaps in the heatsink surface and cpu surface. A very thin layer will do best.

Blackpanther26 is right, realtemp is accurate for E8400's, Some programs read differently
E.g. Using coretemp my idle for my E8400 is 27/29C but with everest its 30/34C.