Is that work

[Deepak_100]

My psu Zebronic z450 watt Features : AC 230V 50Hz 3.5A input; 80mm exhaust fan; 3 pin power cable included Connectors, 24 (20+4) pin connector x1, ATX 12v 4 Pin connector x1, Peripheral 4 pin connector x2, SATA 15 pin connector x2 is support zotac gtx 460 1 gb graphic card

 

[AppleGwava]

I shoud work but i recommend that you get a better psu,yours is pretty trash right now

use this list to get a good psu
http://www.tomshardware.com/forum/id-2547993/psu-tier-list.html

 

[Deepak_100]

But zotac 460 have two six pin pci connector then ? How its work dear :O

 

[Phillip Corcoran]

Make sure you buy a new PSU which has two 6-pin PCIe auxiliary power cables.

Install your Zotac GPU, then connect the two 6-pin power cables to it.

(The Zotac card is supplied with two molex-to-6 pin adapter cables but this method is not recommended).

It's much wiser & safer to buy a PSU which has the required 6-pin PCIe cables without using molex adapters.

 

[AppleGwava]

But zotac 460 have two six pin pci connector then ? How its work dear :O

My bad,i thought you were referring to the rx 460.

as what Phillip has said,its best to get another Psu