Is the Corsair 460X's stock fan setup good enough?

[Charlie_24]

I'm going to use the Corsair 460X as my case but I've noticed that although it has three fans at the front it doesn't have any on the back or top.

I'm building my PC on DinoPC and I've selected another fan that I will ask to be installed on the back as an exhaust fan but I wanted to know if this was necessary.

Please, fully read the question and make sure that your answer actually answers it before you post it. Thanks

Also, if you have any comments or whatever about my build feel free to leave them after your answer.


My Build -


CPU - Intel® Core™ i7 7700K CPU (Quad Core, 4.2GHz - 4.5GHz, 8MB Cache)
CPU Overclocking - 4.8Ghz Overclock Stable on all CPU cores

Liquid CPU Cooler - Corsair Hydro Series™ H100i v2 Extreme Performance Liquid CPU Cooler

Warranty - 5 Year Bronze Warranty

RAM - Corsair Vengeance® LPX 16GB (2x8GB) DDR4 DRAM 3000MHz

Graphics Card - MSI GeForce® GTX 1080 Ti Gaming X 11G

Motherboard - ASUS ROG Maximus IX Hero (Socket-1151, 4x DDR4, ATX)

Operating System - Microsoft Windows 10 Home 64-bit EN (OEM)

Storage - Toshiba DT01ACA200 2TB 3.5" SATA III HDD
SSD Samsung 500GB 960 EVO M.2 NVMe PCIe SSD

Case Fans - EK-Vardar F4-120ER (2200rpm) (This is the extra fan I would have installed as the exhaust fan at the back)

Case - Corsair Crystal 460X RGB (No Optical Drive, ATX)

Power Supply Unit - Corsair RMx Series™ Modular RM750x — 750 Watt 80 PLUS® Gold

Monitor - ASUS ROG Swift PG279Q 27'' - 2560x1440, 165Hz, G-Sync

Mouse - Gigabyte XM300 Gaming Mouse (FREE)
Keyboard - Gigabyte Force K83 Mechanical Keyboard (FREE)

Turnaround - Dispatched within 3 working days

 

[Herc08]

That should be enough. That rear fan is important to keep a balance. One thing though, were are you putting the radiator? Are you going to do a pull/push with the front fans?

 

[Charlie_24]

That should be enough. That rear fan is important to keep a balance. One thing though, were are you putting the radiator? Are you going to do a pull/push with the front fans?

When you say that should be enough do you mean the stock fans or the stock fans with the exhaust?

What balance is the rear fan keeping?

I dont know about the radiator, its getting built and then sent to me. Why?

What do you mean pull/push with the front fans?

 

[Herc08]

Oh so Dino is building this case. If that's the case, you have no worries then. The rear fan should be plenty as an exuast. No need to worry about anything. The push/pull method is fans on both sides of the radiator, but they will probably use the two two fans to mount the radiator.

TL;DR Everything is fine, you are good to go.

 

[Charlie_24]

Oh so Dino is building this case. If that's the case, you have no worries then. The rear fan should be plenty as an exuast. No need to worry about anything. The push/pull method is fans on both sides of the radiator, but they will probably use the two two fans to mount the radiator.

TL;DR Everything is fine, you are good to go.

Alright cool, if you say so.