My music prod. PC has been perfect for a couple of years . The whole system (monitors, displays, subs, synths etc) are on a current sensing switch, controlled by the PC, so when I turn the PC on, everything else turns on too (there is a delay built in). When I shut down the PC everything shuts down as well. All this has been fine, but recently it has come down with a peculiar problem. Unless I power off my FireWire interface BEFORE shutting off the PC, the PC will power off, but start itself 10-15 sec. later. I wonder if anyone has a clue if this is likely a problem with: The PSU, or MB, or the FireWire pci card, or the external interface? BTW, if I turn the interface back on seconds after the PC has shut down, the PC will start up again. If I wait for a minute, it wont. Any ideas, anyone?