Question Is there anything i can do or is my mobo bricked.

[suckmyclockmhz]

CPU: r5 1600
Mobo: asus prime x470 pro
ram: 2x 8gb trident z rgb (3200)
ssd: 480 xpg pcie
psu: rm 550x
Case: NZXT h500i
Windows

While i was in the bios, i increased the ram frequency to 3333 mhz . I saved the setting, but then my PC crashed . I have already tried to clear the cmos , but nothing works.
any help is appreciated, thanks

 

[SchizTech]

Define "crashed;" what exactly do you see?

 

[suckmyclockmhz]

the screen just went black, and my monitor showed no signal

 

[suckmyclockmhz]

Define "crashed;" what exactly do you see?

the screen went black and my monitor says "no signal"

 

[SchizTech]

Did you adjust anything else in the BIOS? Since you reset the CMOS the next steps would be to remove the RAM and re-seat it (actually start with no RAM in between just to be sure everything is cleared) thenreseat the GPU also

 

[suckmyclockmhz]

Did you adjust anything else in the BIOS? Since you reset the CMOS the next steps would be to remove the RAM and re-seat it (actually start with no RAM in between just to be sure everything is cleared) thenreseat the GPU also

I have reseated everything, except for the cpu.

 

[SchizTech]

I can't quite explain what may have happened to the board but as a recently released product it should be under warranty. The most likely alternate scenario is that the RAM is messed up, so if you can somehow borrow some other DDR4 to test with that would more clearly isolate the board.

 

[suckmyclockmhz]

I contacted asus, they told me to rma, thanks for your help