Is this a good pc build?

[Deleted member 1718685]

Cpu:i5 7600
Mobo:Asrock z270 pro 4
Ram:2x8gb 2666mhz patriot viper
Gpu:sapphire nitro +8gb rx 480
Psu cooler master b2 ver2 85+ silver
Case raidmax vortex v4
HDD:wd blue 1tb

 

[Eximo]

i5-7600 with a Z270 Pro 4? Any particular reason for the fancy board?

 

[boosted1g]

Good is a very relative term when you give no parameters.

It is good for gaming, ok but not great for editing.

The difference b/t 2400 and 2666 mhz ram is not even noticable so dont pay extra for higher freq ram

No need to get z serries board if not getting k serries (overclockable) cpu, an h270 is just fine.

If at all possible get an SSD as well to make windows and programs load much much faster.

 

[Eximo]

Memory pricing is fairly flat at the moment so the differences are minor, but you really need a K CPU for memory faster than 2400 anyway.

 

[Deleted member 1718685]

i5-7600 with a Z270 Pro 4? Any particular reason for the fancy board?

Its cheap and there are no good boards with ddr4 support and for 7th generation cpus

 

[Deleted member 1718685]

Good is a very relative term when you give no parameters.

It is good for gaming, ok but not great for editing.

The difference b/t 2400 and 2666 mhz ram is not even noticable so dont pay extra for higher freq ram

No need to get z serries board if not getting k serries (overclockable) cpu, an h270 is just fine.

If at all possible get an SSD as well to make windows and programs load much much faster.

this board is the same price like h270 and h170

 

[Eximo]

There are literally hundreds of 7th gen and DDR4 supporting motherboards.

I suppose if you are looking for an ATX board with B250/H270/Z270 they do start around $100. But you can get high quality uATX boards for around $80.

Might as well get the K series chip and a CPU cooler to get the frequency boost.

 

[Deleted member 1718685]

There are literally hundreds of 7th gen and DDR4 supporting motherboards.

I suppose if you are looking for an ATX board with B250/H270/Z270 they do start around $100. But you can get high quality uATX boards for around $80.

Might as well get the K series chip and a CPU cooler to get the frequency boost.

yes but not where i live they are still gettin 6th generation board only this one is 7th generation but another question will the psu handle this build here is a link http://www.coolermaster.com/powersupply/b-series/b500ver2/
ok they just updated the site and they added z170 but its more expensive z270 is 150 this one is 190

 

[Eximo]

Not that familiar with the european market for power supplies, but the spec sheet is certainly enough. 456W on the 12V rail.

General consensus on the net is that it is an okay budget power supply.

Suggested alternatives are the Cooler Master G450M or Antec VPF450.

 

[Deleted member 1718685]

Not that familiar with the european market for power supplies, but the spec sheet is certainly enough. 456W on the 12V rail.

General consensus on the net is that it is an okay budget power supply.

Suggested alternatives are the Cooler Master G450M or Antec VPF450.

Dont have those on the market here you helped alot thank you