Is this case compatible with MOBO?

[Garrahan90]

I have this old used case I planned on using for my pc (on a real tight budget), I received the motherboard and looked at the mounting hole but they don't seem to match. Anyone can tell me if they are compatible

MSI b250 pro vdh Mobo (micro ATX)
http://imgur.com/kfybDGv (CASE)

 

[Deleted member 1443762]

From looking at the picture and your motherboard it seems the holes do actually match. Have you tried using standoffs?

They look like this: http://img1.shopimg.ca/content/zoom/21925165_main_zoom.jpeg

 

[Weeb Lord]

I would say they should match fine. However, I would also add that depending on /how/ tight your budget is, cases are actually extremely cheap if you opt for the less feature-rich route.. look on microcenters webstore and you will likely find mid tower cases for sub $40

 

[Raz_Crimson]

<p>Technically they should line up. That case would fit an Micro-ATX, but you must use stand-offs. Use them only on the Screw points marked with a white Circle. Try putting the I/O Shield and match the I/O ports in the MOBO. You should see like 6 stand-offs or holes lined up. You can screw into those holes. But please clean your case before that.

Use the Link: http://imgur.com/0jOfiYq