Question Is this correct for front panel connectors?

ironcreeper2004

Reputable
Oct 25, 2017
144
2
4,685
0
The board in the picture is a B450 Steel Legend MATX. On the far left I've connected the cable labeled "USB" there, on the far right I've connected the PLED+, PLED-, HDLED+-, PWR and RESET. The PLED plus and minus are in the top left, the HDLED+- is in the bottom left, the PWR is in the top right and the RESET is in the bottom right.

https://ibb.co/F8xDPB1

Sorry if I didn't describe this well, thanks for any help.
 

Furzumz

Upstanding
May 28, 2020
334
59
290
18
Matching your description to the manual it sounds right

It doesn't say which pin is for the + or - for the PLED (power indicator light) but worst case scenario the power indicator won't work and you'll just have to move the connector to the proper + and - pins
 

ASK THE COMMUNITY

TRENDING THREADS