[SOLVED] Is this Right?

[Ferimer]

Can someone take a look at my signature and look at my memory section and tell me if what i am seeing is actually normal? i dont think it is and i believe i am getting less out of my ram then i should be?

 

[rgd1101]

this?
1599.6 MHz (DDR4-3200) - Ratio 1:16
yes, it is ddr double data rate. 1599.6x2 ~ 3200

 

[Ferimer]

this?
1599.6 MHz (DDR4-3200) - Ratio 1:16
yes, it is ddr double data rate. 1599.6x2 ~ 3200

I know that part is right, i was wondering about what this meant?

Corsair 8192 MB (DDR4-2137) - XMP 2.0 - P/N: CMK16GX4M2B3200C16

 

[rgd1101]

it 8 GB and based speed is 2137(non-xmp)

 

[Ferimer]

so have i done something wrong? do i need to change something?

 

[rgd1101]

look ok. it is for gaming? 1050ti is weak

 

[Ferimer]

look ok. it is for gaming? 1050ti is weak

Yeah I am slowly working on upgrading and changing everything just spent over $550 to upgrade ram, mobo and cpu. Gotta wait a bit for a new GPU and SSD

 

[Ferimer]

I am hoping the old parts I had sell so I can put that towards a new GPU might get a 1660 Super or Rx 570 or 580

 

[jimbojones19]

I am hoping the old parts I had sell so I can put that towards a new GPU might get a 1660 Super or Rx 570 or 580

my ram says the same thing. nothing to worry about. think of it like a part number which identifies that the ram's base speed or (default speed)

 

[Ferimer]

my ram says the same thing. nothing to worry about. think of it like a part number which identifies that the ram's base speed or (default speed)

Its weird because I bought it at 3200 but apparently its base speed is way down low ?

 

[rgd1101]

based speed is low because you need to first boot up the pc before you can set the xmp profile

 

[Ferimer]

based speed is low because you need to first boot up the pc before you can set the xmp profile

So I have enabled the xmp in my bios. There isnt any other steps I need to take right ?

 

[rgd1101]

So I have enabled the xmp in my bios. There isnt any other steps I need to take right ?

nope. that it