friskydingo

Distinguished
Sep 9, 2007
6
0
18,510
I'm trying to figure out some memory problems and just wanted to make sure this looked normal.
http://img100.imageshack.us/img100/9756/memoryor7.jpg

I'm only running 1gig in that screen. I have memory acceleration turned on and I'm not sure if I should or not. If I don't have it on, CPU-Z says my CAS latency is 3.0 and when I do have it turned on it says 2.0. The current memory I'm running is Corsair XMS 1GB (2 x 512MB) Memory TWINX1024-3200C2PT, DDR400 Dual Channel Platinum Edition, 184 Pin, w/ Silver Heat Spreader, which is suppose to run at 2.0 CAS if I'm not mistaken. This is what CPU-Z says when running in Memory Acceleration mode: CPU-Z
Is there something else I should do if I have that turned on like increase the voltage to my memory? And what should I increase it to?
 
Run the memory at what ever it is spec'd at...in your case that is CL2

from corsair
"This memory has been verified to operate
at 200 MHz (DDR400) at aggressive latencies of 2-3-3-6"

If you have 4 sticks they recommend running at 2.5, but it never hurts to try 2

Enjoy ure hellgate :)