Is this userbenchmark good? NEED HELP!

Status
Not open for further replies.
Solution
It looks okay, but it looks like your RAM is running at 2133MHz instead of the 2400MHz it is rated.

100 series motherboards are rated for 2133MHz RAM. With an H170 chipset you might be able to OC your RAM, but typically Z-series chipsets are for overclocking.

Boot to BIOS and see if you can enable XMP in your memory/dram settings. If it doesn't boot and you can't get it to boot, remove your CMOS battery and wait 30 seconds to 2 minutes and reinsert to reset BIOS settings to allow you to boot again at default settings.
It looks okay, but it looks like your RAM is running at 2133MHz instead of the 2400MHz it is rated.

100 series motherboards are rated for 2133MHz RAM. With an H170 chipset you might be able to OC your RAM, but typically Z-series chipsets are for overclocking.

Boot to BIOS and see if you can enable XMP in your memory/dram settings. If it doesn't boot and you can't get it to boot, remove your CMOS battery and wait 30 seconds to 2 minutes and reinsert to reset BIOS settings to allow you to boot again at default settings.
 
Solution
Status
Not open for further replies.