Question Issue with Crucial DDR5 RAM 4x32 GB on Asus ProArt Z690

[DSDS]

I've finished the following build:
1) Intel® Core™ i9-13900KF Processor
2) Asus ProARt Z690 Creator WiFI
3) Crucial 4x32GB DDR5

When I start the machine CPU test Q-Led (red) passes well, but RAM Q-LED (yellow) does not pass. There is no display and the system does not boot. I've updated latest MB bios ProArt-Z690-CREATOR-WIFI-ASUS-2103 but it did not help at all and the behaviour is the same. RAM I am using is on ASSUS QVL.

Please help. Thanks.

 

[rgd1101]

there is no display unless you get a gpu
anything with 'F' on the cpu have no igpu

test with 1 stick of ram?

 

[DSDS]

there is no display unless you get a gpu
anything with 'F' on the cpu have no igpu

test with 1 stick of ram?

Sorry I did not mention, I've got GPU put separate in PCI slot. But Q-LED stays on for RAM check and it seems that this part does not work well on boot.

I've tried with only one stick. I've tried in different RAM channels with only one stick. The end result is always the same.

 

[rgd1101]

what the psu?
got all the power to the motherboard?

 

[DSDS]

what the psu?
got all the power to the motherboard?

I am using Corsair AX1600i

I've connected both ATX PWR and ATX 12V PWD for CPU and this MB also 2 extra 12V inputs which I've also connected.

 

[rgd1101]

sound like you got everything setup correctly.
My guess would be the motherboard, rma it

 

[DSDS]

I've experimented with different numbers of sticks in MB. Eventually, I've learned that one stick in 32x2 pair when used as a single stick on MB would never allow the system to boot. Therefore, I've returned that pair and now I am using 64 GB RAM system that works. Unfortunately, I wanted to have 128GB system even at lowest RAM speed. Now I am not sure if I should buy new 32GBx2 pair jus to see if 4 sticks would even work. QVL is ok and Crucial also says they are compatible with this MB.