I built a new rig with the parts mentioned below. No drives connected, no case headers connected yet for testing.
Issue: System is shutting off and resetting to boot level either while booting into linux live testing usb or shortly (1-5min) after booting. Tested with different PSUs, only necessary headers connected to Motherboard. Sometimes no video signal after rebooting due to this issue. Tried CMOS reset as well as changing some bios power settings. One time when booting into Ubuntu Linux it said something "mce: Hardware Error CPU 14, Bank 5 / TSC 0 ADDR / PROCESSOR 2 microcode a20120e". Notable mention: fans are going at full speed twice for a second when booting.
Any Ideas?
MBD: Gigabyte B550M K
CPU: Ryzen 7 5700X (renewed but tested by seller)
GPU: RTX 2060 Super (known to be functioning from previous config)
Gskill generic 16GB DDR4
PSUs: bequiet straight power 11 650w and a System Power 7 450w (both tested & known to be functioning)
EDIT: Changed motherboard for another one. Error still persists
Issue: System is shutting off and resetting to boot level either while booting into linux live testing usb or shortly (1-5min) after booting. Tested with different PSUs, only necessary headers connected to Motherboard. Sometimes no video signal after rebooting due to this issue. Tried CMOS reset as well as changing some bios power settings. One time when booting into Ubuntu Linux it said something "mce: Hardware Error CPU 14, Bank 5 / TSC 0 ADDR / PROCESSOR 2 microcode a20120e". Notable mention: fans are going at full speed twice for a second when booting.
Any Ideas?
MBD: Gigabyte B550M K
CPU: Ryzen 7 5700X (renewed but tested by seller)
GPU: RTX 2060 Super (known to be functioning from previous config)
Gskill generic 16GB DDR4
PSUs: bequiet straight power 11 650w and a System Power 7 450w (both tested & known to be functioning)
EDIT: Changed motherboard for another one. Error still persists
Last edited: