Question Issue with TP Link AC2300 and Netgear GS308v3 switch

cwburns32

Honorable
Jul 30, 2014
65
0
10,660
5
Brand new GS308v3. I have RCN as my ISP, an Aris DG2470 modem which plugs directly into a TP Link AC3200, everything works fine up until this point. The second I plug the GS308v3 into the back of the router my WiFi breaks and I cannot get any connectivity out of any of the open router ports nor from the open ports on the switch (despite green lit ports). I can, however, see the router's SSIDs and can connect to them but with no internet. Any ideas on how to fix? Setting on router maybe? Please help.
 
Last edited:
How are these all connected and configured?
  • What ports are used? Router to modem, Router to switch
  • DHCP settings of each
  • Any custom settings like the modem in bridge mode.
  • Any wiring oddities. Like two or more cables going from the switch to router or cable from the switch to the router and modem.
 

cwburns32

Honorable
Jul 30, 2014
65
0
10,660
5
How are these all connected and configured?
  • What ports are used? Router to modem, Router to switch
  • DHCP settings of each
  • Any custom settings like the modem in bridge mode.
  • Any wiring oddities. Like two or more cables going from the switch to router or cable from the switch to the router and modem.
  • Aris DG2470, top port to WAN port on TP Link AC3200 router
  • Tried all ports 1-4 on TP Link AC3200 to...well I have tried every one of the 8 Netgear GS308v3 ports as well
  • DHCP setting is on on both router and modem
  • How do I access DHCP settings on switch, didn't think you could on an unmanaged switch?
  • Aris DG2470 modem is in bridge mode
  • I have cable from modem to router, then router to switch, nothing else
I can get into my modem settings, not sure if below info is helpful
  • DHCP is enabled on the modem
  • Dynamic IP address
  • uPnP is enabled
  • Modem running in bridged mode
  • Firewall enabled?
  • Block pings enabled
  • IPSec Pass Through enabled
  • PPTP Pass Through enabled
  • L2TP Pass Through enabled
 
Last edited:

ASK THE COMMUNITY

TRENDING THREADS

Latest posts