Hello,
Recently built a new computer,intel i7 2600k chip, Asus sabertooth p67 mobo, evga geforce 560 ti, cooler master 700w power, cooler master HAF X case, new seagate 1tb barracuda hdd and 2, 4gb patriot RAM. So everything went fine with the build, windows 7 64bit loaded fine, but when i installed the driver cd that came with the mobo, it restarted and now it wont show and video at all. The mobo had a red led to show if there is a problem with any component and it stays on for the video card. ive tried to reset the cmos, and the card was fine before i installed the drivers, it wont work with any other video cards ive tried, a nvidea. I have also used an extra blank 1tb seagate drive to see if it was the drivers, but still no go on the video card
Recently built a new computer,intel i7 2600k chip, Asus sabertooth p67 mobo, evga geforce 560 ti, cooler master 700w power, cooler master HAF X case, new seagate 1tb barracuda hdd and 2, 4gb patriot RAM. So everything went fine with the build, windows 7 64bit loaded fine, but when i installed the driver cd that came with the mobo, it restarted and now it wont show and video at all. The mobo had a red led to show if there is a problem with any component and it stays on for the video card. ive tried to reset the cmos, and the card was fine before i installed the drivers, it wont work with any other video cards ive tried, a nvidea. I have also used an extra blank 1tb seagate drive to see if it was the drivers, but still no go on the video card
Facebook
Twitter
Instagram