Jled Strips 5 Pin

[Jakexz]

I recently extracted 2 LED strips from an old case from the front panel. The motherboard had slots for "Jled 1" and Jled 2". The new motherboard I bought does not have these ports. The strip and cable aren't the standard molex 4 pin, instead there are 5 holes for the old boards "JLed" slots.

My goal is to use these strips in my new case, if only I could figure out where to plug them in, or how to rewire them.

Motherboard: Z170MX-Gaming 5
Case: ECLIPSE P400S

Here's a picture of the LED strip:

http://imgur.com/a/QiByH

 

[Lutfij]

I'm assuming that the LED strips were extracted from a Dell XPS system, correct? If so they are proprietary and will only work with the controller it came bundled with. If it's not from the XPS, I stand corrected but you're going to have to provide where you got it from.

Further reading
https://forums.anandtech.com/threads/dell-xps-720-mod-btx-to-atx.2240071/
http://en.community.dell.com/support-forums/desktop/f/3514/t/18624778