Here are the parts.
Antec Twelve Hundred Black Steel ATX Full Tower Computer Case - Retail
Logitech 920-000914 Black Wired Ultra-thin Illuminated Keyboard - Retail
Seagate Barracuda 7200.11 ST31000333AS 1TB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM
RAZER Lachesis RZ01-00170100-R3M1 Banshee Blue 9 Buttons 1 x Wheel USB Laser Gaming Mouse - Retail
EDIMAX EW-7128G PCI Wireless Card - Retail
LG 22X DVD±R DVD Burner with LightScribe Black SATA Model GH22LS30 - OEM
Item #: N82E16827136153
EVGA 896-P3-1265-AR GeForce GTX 260 Core 216 896MB 448-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card - Retail
EVGA 132-BL-E758-A1 LGA 1366 Intel X58 ATX Intel Motherboard - Retail
Item #: N82E16813188039
CORSAIR CMPSU-850TX 850W ATX12V 2.2 / EPS12V 2.91 SLI Ready CrossFire Ready Modular Active PFC Power Supply - Retail
G.SKILL PI Black 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Triple Channel Kit Desktop Memory Model F3-12800CL8T-6GBPI-B - Retail
Item #: N82E16820231238
Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920 - Retail
Ok so I began building it... Everything has gone along fine so far. Took a while to figure everything out and I still have a few questions, but I was really sad when I actually turned it on... This is what happened: I turned on the Power Supply and 2 lights on the mobo lit up. Pressed the Reset CMOS on the Mobo, pressed the Green Power button and all the lights turned on for maybe half a second and then it completely shut off. Why the hell did this happen? I know I connected everything, although there are a couple extra wires from my PSU still dangling in there... The only things I may have not connected properly were the HD and DVD/CD drive, I put those in like SATA 6 and 7 or something and there are 2 open SATA 4 and 5 ports but that has nothing to do with it turning off instantly... And I didn't know the CPU Cooler had like that paste thing on it, and smudged a liiiiittle bit of it off. There were like 3 lines of this paste going from top to bottom, I took off almost half of the 2nd line (the middle)
Please let me know why the hell it's doing this...
Antec Twelve Hundred Black Steel ATX Full Tower Computer Case - Retail
Logitech 920-000914 Black Wired Ultra-thin Illuminated Keyboard - Retail
Seagate Barracuda 7200.11 ST31000333AS 1TB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM
RAZER Lachesis RZ01-00170100-R3M1 Banshee Blue 9 Buttons 1 x Wheel USB Laser Gaming Mouse - Retail
EDIMAX EW-7128G PCI Wireless Card - Retail
LG 22X DVD±R DVD Burner with LightScribe Black SATA Model GH22LS30 - OEM
Item #: N82E16827136153
EVGA 896-P3-1265-AR GeForce GTX 260 Core 216 896MB 448-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card - Retail
EVGA 132-BL-E758-A1 LGA 1366 Intel X58 ATX Intel Motherboard - Retail
Item #: N82E16813188039
CORSAIR CMPSU-850TX 850W ATX12V 2.2 / EPS12V 2.91 SLI Ready CrossFire Ready Modular Active PFC Power Supply - Retail
G.SKILL PI Black 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Triple Channel Kit Desktop Memory Model F3-12800CL8T-6GBPI-B - Retail
Item #: N82E16820231238
Intel Core i7 920 Nehalem 2.66GHz LGA 1366 130W Quad-Core Processor Model BX80601920 - Retail
Ok so I began building it... Everything has gone along fine so far. Took a while to figure everything out and I still have a few questions, but I was really sad when I actually turned it on... This is what happened: I turned on the Power Supply and 2 lights on the mobo lit up. Pressed the Reset CMOS on the Mobo, pressed the Green Power button and all the lights turned on for maybe half a second and then it completely shut off. Why the hell did this happen? I know I connected everything, although there are a couple extra wires from my PSU still dangling in there... The only things I may have not connected properly were the HD and DVD/CD drive, I put those in like SATA 6 and 7 or something and there are 2 open SATA 4 and 5 ports but that has nothing to do with it turning off instantly... And I didn't know the CPU Cooler had like that paste thing on it, and smudged a liiiiittle bit of it off. There were like 3 lines of this paste going from top to bottom, I took off almost half of the 2nd line (the middle)
Please let me know why the hell it's doing this...