[SOLVED] Just built a new pc but won't boot

[yukiduki]

Hey guys,

I just built a new PC but when I try to boot the only thing I can see is the Power LED turning on, that's all.
The CPU Fan and gpu fans aren't spinning and my display just says: No Signal.
My PC:
Mobo: MSI B450 TOMAHAWK
CPU: amd ryzen 5 3600 with stock cooler
GPU: Gigabyte GTX 1060 6gb oc
RAM: 2x8gb ddr4 vengeance 3200mhz
PSU: Coolermaster 500watt

 

[alexoiu]

Hi, Have you connected the 8 pin CPU power cable to motherboard?

 

[yukiduki]

Hi, Have you connected the 8 pin CPU power cable to motherboard?

Yes I have, also tried taking it out and in but didn't change anything ^.^

 

[doolittle]

Might need to get AMD's Short Term Processor Loan Boot Kit to get that B450's BIOS updated.

 

[alexoiu]

Yes I have, also tried taking it out and in but didn't change anything ^.^

Do the case fans spin when starting the board?

 

[yukiduki]

Do the case fans spin when starting the board?

Nope =/

 

[alexoiu]

I suggest testing the board outside the case, only CPU and CPU cooler installed. See if still no fan spinning.

 

[SgtScream]

Try reseating the memory.

 

[Flayed]

Hey guys,

I just built a new PC but when I try to boot the only thing I can see is the Power LED turning on, that's all.
The CPU Fan and gpu fans aren't spinning and my display just says: No Signal.
My PC:
Mobo: MSI B450 TOMAHAWK
CPU: amd ryzen 5 3600 with stock cooler
GPU: Gigabyte GTX 1060 6gb oc
RAM: 2x8gb ddr4 vengeance 3200mhz
PSU: Coolermaster 500watt

flash the bios using the bios flashback feature

Flash BIOS Button: Simply use a USB key to flash any BIOS within seconds, without installing a CPU, memory or graphics card.

 

[yukiduki]

flash the bios using the bios flashback feature

Flash BIOS Button: Simply use a USB key to flash any BIOS within seconds, without installing a CPU, memory or graphics card.

I did that already a couple days ago thx

 

[yukiduki]

I'm

Try reseating the memory.

Already tried, also with different ram sticks

 

[SgtScream]

There's an ez debug led on page 37 of the manual. Are there any lights lit?

 

[Flayed]

I would try it with a different PSU

 

[yukiduki]

NVM guys I plugged my led Power and power in the wrong way thanks for the help 😊