medjohnson77 :
It is a m2n32-sli deluxe wifi, I was going to get the cheaper one but didn't because of the 570 chipset. It is showing the north bridge at a 590 but the south bridge is showing as a 570 chipset. Could this have to do with a driver update??
The board that you have is a hybrid 590 north bridge with a 570 south bridge..
Any way try this.. as i have had it running for 4 days with out trouble
Disable Cool ´n Quiet, to unlock multiplier.
When Cool´n Quite enable only 12.5 as this is the only one that works.
My 9850 running fast and stable at 14x200
Temp and Voltages,
how to make 9850 & M2N32-SLI work:
When you set manual voltage for CPU, works in this mode:
Auto: 1.25 + 0,05v, show 1.30 and 9850 runs very hot.
I use 1.1625 Volts on the processor with a CPU Offset option (0,02v) to run at 14x200, and temps show 41/43 idle 55/56 full load.
This processor over heats and thats why Windows is unstable..
This board still has some issues with 9850 and hence maybe why the last core is packing up as its just too much for it but dont tell the supplier tho.
Do your self a favour too get a higher grade HSF youll need it
See bellow
From CPU-Z
CPU Arch : 1 CPU - 4 Cores - 4 Threads
CPU PSN : AMD Phenom 9850 Quad-Core Processor
CPU EXT : MMX(+) 3DNow!(+) SSE SSE2 SSE3 SSE4A x86-64
CPUID : F.2.3 / Extended : 10.2
CPU Cache : L1 : 4 x 64 / 4 x 64 KB - L2 : 4 x 512 KB
CPU Cache : L3 : 2048 KB
Core : Agena (65 nm) / Stepping : DR-B3
Freq : 2812.88 MHz (200.92 * 14)
MB Brand : Asus
MB Model : M2N32-SLI DELUXE
NB : NVIDIA SPP190 (C51XE) rev A2
SB : NVIDIA nForce 570 SLI rev A3
GPU Type : GeForce 9800 GTX
GPU Clocks : Core 675 MHz / RAM 2200 MHz
DirectX Version : 10.0
RAM : 2048 MB DDR2 Dual Channel
RAM Speed : 401.8 MHz (1:2) @ 4-4-4-12
Slot 1 : 1024MB (PC2-6400)
Slot 1 Manufacturer : Corsair
Slot 2 : 1024MB (PC2-6400)
Slot 2 Manufacturer : Corsair