Hello everyone.
I need someone with more knowledge.
So I just installed a new MOBO, CPU + cooler and RAM sticks. GPU is the same and PSU is the same.
I also installed a brand new OS Windows 11 Pro as well as doing a thorough cleaning of fans and cabinet before installation.
Specs are as follows:
Motherboard: MSI B650 Gaming Plus WIFI Motherboard
CPU: AMD Ryzen 7 7700X
GPU: ASUS RTX 3070
RAM: G.Skill Flare X5 DDR5 6000mhz 32GB (16GB x 2)
CPU Cooler: NZXT T120 CPU Fan 120mm
PSU: 750W RM Modular https://www.multitronic.fi/en/products/923851 (it's from 2013)
Case: Fractal Design Meshify C Temp G
GPU TEST using Furmark - Ran for 10 minutes:
View: https://imgur.com/a/bVWpnN0
CPU TEST using Cinabench - Ran for 10 minutes (i also included system fan speeds during the test):
View: https://imgur.com/a/jfXfcpQ
CASE layout/fan-setup (RED = Exhaust. BLUE = Intake):
View: https://imgur.com/a/nDIPECs
I would like to add that the fans in front (intake) are 140mm. The rest are 120mm.
Can anyone take some time and look at it and tell me if it's all ok, or if there is something wrong anywhere?
I reccon the temps are alright, nothing special, but just alright - However I am not sure about voltage and all that other jazz.
Thanks a bunch!!
I need someone with more knowledge.
So I just installed a new MOBO, CPU + cooler and RAM sticks. GPU is the same and PSU is the same.
I also installed a brand new OS Windows 11 Pro as well as doing a thorough cleaning of fans and cabinet before installation.
Specs are as follows:
Motherboard: MSI B650 Gaming Plus WIFI Motherboard
CPU: AMD Ryzen 7 7700X
GPU: ASUS RTX 3070
RAM: G.Skill Flare X5 DDR5 6000mhz 32GB (16GB x 2)
CPU Cooler: NZXT T120 CPU Fan 120mm
PSU: 750W RM Modular https://www.multitronic.fi/en/products/923851 (it's from 2013)
Case: Fractal Design Meshify C Temp G
GPU TEST using Furmark - Ran for 10 minutes:
View: https://imgur.com/a/bVWpnN0
CPU TEST using Cinabench - Ran for 10 minutes (i also included system fan speeds during the test):
View: https://imgur.com/a/jfXfcpQ
CASE layout/fan-setup (RED = Exhaust. BLUE = Intake):
View: https://imgur.com/a/nDIPECs
I would like to add that the fans in front (intake) are 140mm. The rest are 120mm.
Can anyone take some time and look at it and tell me if it's all ok, or if there is something wrong anywhere?
I reccon the temps are alright, nothing special, but just alright - However I am not sure about voltage and all that other jazz.
Thanks a bunch!!
Last edited: