Hey guys I just started my build yesterday and tried to post before I started adding components to the case and it won't. I can't even seem to get the PSU fan to spin or get any lights to turn on on the MB or GPU.
Pretty much think I connected everything i needed to, here is a breakdown of what I remember,
1. When posting I had the MB on it's box, CPU installed, Ram installed (2 8GB sticks), the Cooler installed (Hyper Master 212), and then the GPU was seated as well.
2. Plugged in the PSU attached 24pin to Mb and then the 4x4 or 8-pin connector to CPU spot on MB.
3. Plugged in cooler fan to cpu fan.
4. Plugged in both the 6pin and 8pin connectors on the GPU to the PSU.
5. Attempted to do the quick "screw-driver connect" for the boot and nothing happened.
later, I ended up putting things in the case to see if I could get the power switch on the case to work and it didn't light up or work. I am at work right now, but am trying to get some trouble shooting tips and stuff for when I get home so I can test it out and try and get it to work.
Build:
PCPartPicker part list: http://pcpartpicker.com/p/9bBtD3
CPU: Intel Core i5-4590 3.3GHz Quad-Core Processor
CPU Cooler: Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler
Motherboard: Gigabyte GA-Z97X-Gaming 5 ATX LGA1150 Motherboard
Memory: G.Skill Ripjaws X Series 16GB (2 x 8GB) DDR3-1600 Memory
Storage: Samsung 850 EVO-Series 250GB 2.5" Solid State Drive
Storage: Seagate Barracuda 3TB 3.5" 7200RPM Internal Hard Drive
Video Card: MSI GeForce GTX 970 4GB Twin Frozr V Video Card
Case: Phanteks Enthoo Pro ATX Full Tower Case
Power Supply: EVGA SuperNOVA GS 650W 80+ Gold Certified Fully-Modular ATX Power Supply
Operating System: Microsoft Windows 8.1 OEM (64-bit)
Monitor: Asus VS247H-P 23.6" Monitor
Pretty much think I connected everything i needed to, here is a breakdown of what I remember,
1. When posting I had the MB on it's box, CPU installed, Ram installed (2 8GB sticks), the Cooler installed (Hyper Master 212), and then the GPU was seated as well.
2. Plugged in the PSU attached 24pin to Mb and then the 4x4 or 8-pin connector to CPU spot on MB.
3. Plugged in cooler fan to cpu fan.
4. Plugged in both the 6pin and 8pin connectors on the GPU to the PSU.
5. Attempted to do the quick "screw-driver connect" for the boot and nothing happened.
later, I ended up putting things in the case to see if I could get the power switch on the case to work and it didn't light up or work. I am at work right now, but am trying to get some trouble shooting tips and stuff for when I get home so I can test it out and try and get it to work.
Build:
PCPartPicker part list: http://pcpartpicker.com/p/9bBtD3
CPU: Intel Core i5-4590 3.3GHz Quad-Core Processor
CPU Cooler: Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler
Motherboard: Gigabyte GA-Z97X-Gaming 5 ATX LGA1150 Motherboard
Memory: G.Skill Ripjaws X Series 16GB (2 x 8GB) DDR3-1600 Memory
Storage: Samsung 850 EVO-Series 250GB 2.5" Solid State Drive
Storage: Seagate Barracuda 3TB 3.5" 7200RPM Internal Hard Drive
Video Card: MSI GeForce GTX 970 4GB Twin Frozr V Video Card
Case: Phanteks Enthoo Pro ATX Full Tower Case
Power Supply: EVGA SuperNOVA GS 650W 80+ Gold Certified Fully-Modular ATX Power Supply
Operating System: Microsoft Windows 8.1 OEM (64-bit)
Monitor: Asus VS247H-P 23.6" Monitor