k7s5a won't start.........

[Guest]

Archived from groups: alt.comp.periphs.mainboard.elitegroup (More info?)

Hi,
I have a K7S5A motherboard, and I have put it in a new tower.
The probleme is ..... no power on.
I intalled new power supply but ...no effect.
I checked jumpers setting, It seem look ok.
Do you have idea , what could stop the start up..
Thanks.

Richard.........

sorry for my english

 

[Smoker]

Archived from groups: alt.comp.periphs.mainboard.elitegroup (More info?)

"alian2001" <rovni@videotron-dot-ca.no-spam.invalid> wrote in message
news:41a41806$1_2@alt.athenanews.com...
> Hi,
> I have a K7S5A motherboard, and I have put it in a new tower.
> The probleme is ..... no power on.
> I intalled new power supply but ...no effect.
> I checked jumpers setting, It seem look ok.
> Do you have idea , what could stop the start up..
> Thanks.
>
If you don't even get light signal coming on I think your power supply is
not connected properly or is faulty. If you have lots of hardware and a
lowend PSU that combination rarely works with K7S5A. This board demands a
good quality high wattage (400W+) unit. If you have another power supply,
try it in your new tower.

 

[Guest]

Archived from groups: alt.comp.periphs.mainboard.elitegroup (More info?)

"alian2001" <rovni@videotron-dot-ca.no-spam.invalid> schrieb im Newsbeitrag
news:41a41806$1_2@alt.athenanews.com...
> Hi,
> I have a K7S5A motherboard, and I have put it in a new tower.
> The probleme is ..... no power on.
> I intalled new power supply but ...no effect.
> I checked jumpers setting, It seem look ok.
> Do you have idea , what could stop the start up..
> Thanks.
>
> Richard.........
>
> sorry for my english
>

Hi 😱)

I had the same problem, unplug the power cord, push the power button an hold
it pushed, plug the power cord ;o) if it won't work at the first try, do
this 2 or 3 times, i wish you luck.

Regards

Michael