- Nov 26, 2017
- 14
- 0
- 510
I just bought brand new Kingston DT 100G3 16GB Flash drive.
I wanted to give it a go by plugging it in PC USB slot and i was surprised that i didnt loaded up.
So here is the explanation of the issue:
I have 4 USB Slots on Back,2 in front and 4 more in-desk slots.
On back There is only 2 slots occupied. 1 is headset (light) and second is mouse and keyboard together (if you dont know what its in desk usb slots).
So the real deal is that i tried to plug in USB first in front,i tried both free slots in front (which i believe are 2.0 AND PLEASE NOTE that this USB Flash drive is compatible with 3.0 and 2.0) and nothing.
Then i tried to plug it into second free slot(where i always plugged in my older USB flash drive and it always worked) and nothing,then i tried plugging it in second free slot,but it wouldnt let me do it,it cant be plugged it,it doesnt let me,even if its USB slot.
So i unplugged in desk usb cable and plugged in flash. Believe it or not,it worked! So i said " if this worked i should try to plug it in 4th and last slot" where headsets light is connected,i unplugged headset and plugged in flash drive and it didnt work.
After that i plugged it in in-desk free slot,and it worked,i even tried to transfer movie of 2gb to flash drive and it would take 40mins (it was transferring data in 700kb/s..). But in-desk slots always works.
So is there any solution to this complex problem?
If somebody doesnt understand well ill try to explain better or at least take pictures of slots.
And yes,i plugged flash drive in TV it worked fine,i plugged it in lap top,it worked fine.
But my PC is problem i suppose. Now,thing is i tried to connect old flash drive on each slot,and it worked without the problem.
As well i though by uninstalling old flash drive from device manager would do a trick,so i did it,and it didnt worked.
Then i plugged it in in-desk slot (new flash drive) (because it loads up every time there) and i uninstalled it,kingston new flash,and nothing.
Any kind of a solution?
I wanted to give it a go by plugging it in PC USB slot and i was surprised that i didnt loaded up.
So here is the explanation of the issue:
I have 4 USB Slots on Back,2 in front and 4 more in-desk slots.
On back There is only 2 slots occupied. 1 is headset (light) and second is mouse and keyboard together (if you dont know what its in desk usb slots).
So the real deal is that i tried to plug in USB first in front,i tried both free slots in front (which i believe are 2.0 AND PLEASE NOTE that this USB Flash drive is compatible with 3.0 and 2.0) and nothing.
Then i tried to plug it into second free slot(where i always plugged in my older USB flash drive and it always worked) and nothing,then i tried plugging it in second free slot,but it wouldnt let me do it,it cant be plugged it,it doesnt let me,even if its USB slot.
So i unplugged in desk usb cable and plugged in flash. Believe it or not,it worked! So i said " if this worked i should try to plug it in 4th and last slot" where headsets light is connected,i unplugged headset and plugged in flash drive and it didnt work.
After that i plugged it in in-desk free slot,and it worked,i even tried to transfer movie of 2gb to flash drive and it would take 40mins (it was transferring data in 700kb/s..). But in-desk slots always works.
So is there any solution to this complex problem?
If somebody doesnt understand well ill try to explain better or at least take pictures of slots.
And yes,i plugged flash drive in TV it worked fine,i plugged it in lap top,it worked fine.
But my PC is problem i suppose. Now,thing is i tried to connect old flash drive on each slot,and it worked without the problem.
As well i though by uninstalling old flash drive from device manager would do a trick,so i did it,and it didnt worked.
Then i plugged it in in-desk slot (new flash drive) (because it loads up every time there) and i uninstalled it,kingston new flash,and nothing.
Any kind of a solution?
Facebook
Twitter
Instagram