Kingston HyperX Beast causing BSOD @ 2133mhz help

[baxterbasics]

I recently upgraded from 16Gb HyperX Fury (1600 but OCd to 1866) to 32Gb HyperX Beast (2400).

I've got it running fine at 1866 but any higher and I get BSOD as Windows loads every time.

My APU and motherboard both supposedly support 2133, I have tried various combinations of settings in BIOS without luck. This includes XMP profile and setting the DRAM specifically to 2133.

I am aware there are many similar threads on here but I haven't found any that I can relate to my BIOS options.

Board: MSI A78M-E45
APU: A10-7700K
GPU: Radeon R7 250 1G DDR5 (Dual graphics)

Example of BIOS options available to me (not from my actual system):

http://www.overclockers.com/forums/attachment.php?attachmentid=156036&d=1415470118

Any advice on getting it running at 2133 (or even 2400) greatly appreciated!

 

[Tradesman1]

Is DRAM voltage at 1.65? Also look for CPU/NB or CPUVDD voltage and try at 1.25