Archived from groups: alt.comp.periphs.dcameras (
More info?)
Since the Digitapower ACD-FJ3 ac adapter is the same one that fits my Fuji
2650Z the power connector is 2.3mm OD, 0.7mm ID. OD= Outside Diameter,
ID=Inside Diameter. ID is zero dot seven millimeter.
The Voltage is 3 volts the current is at least 1.5 Amperes.
http://www.digipowersolutions.com/show_product.php3?pid=1010&Group=AC+Adaptors&Type=&Manuf=&subgroup=
--
CSM1
http://www.carlmcmillan.com
--
"Franc Zabkar" <fzabkar@optussnet.com.au> wrote in message
news:3du970l6vum2ph338hkm43ud2c9srsaluv@4ax.com...
> On Tue, 6 Apr 2004 15:52:41 -0400, "Ron Baird" <ronbaird@kodak.com>
> put finger to keyboard and composed:
>
> >Greetings Franc,
> >
> >You can use the following for the camera, here in US. If you are in
> >Australia it may be different. In the US it is a 3volt adapter. For a
full
> >review of the accessories in Australia, log onto the Kodak site there,
and
> >check accessories. You will get a full review of the adapter. The plug
> >should fit just fine. If not, then return it to the retailer for an
> >exchange as the plug should fit.
> >
> >Let me know how you make out.
> >
> >Ron Baird
> >Eastman Kodak Company
>
> Finding an AC adaptor (via mail order) is not a problem. Finding a
> "full review" on the Kodak website is another matter. There are *no*
> specs, neither voltage (eg 3.0, 3.2, 3.3V) nor current. I have three
> 3VDC 1.5A switchmode adaptors of the correct polarity (centre
> positive) that almost fit, except that the plugs are too loose. That's
> why my original question was "is the plug an EAIJ type, ie one with a
> yellow plastic tip?" The picture on Kodak's website is not detailed
> enough to answer this question.
>
> I'd rather buy a new plug than a new adaptor, especially at Kodak's
> prices. I just need to know what kind of plug is required. Hopefully
> it is not some proprietary animal. Can you help me?
>
> >"Franc Zabkar" <fzabkar@optussnet.com.au> wrote in message
> >news:cs9u605cr15gu3vaid915df3mr4qefllut@4ax.com...
> >> Doea anyone have an AC adaptor for a Kodak DX4530 digicam? I'd like to
> >> know what the DC plug looks like. I've tried a generic power pack, but
> >> the plug is a loose fit, and the camera does not power up. Is the plug
> >> an EAIJ type, ie one with a yellow plastic tip?
> >>
> >>
> >> - Franc Zabkar
> >> --
> >> Please remove one 's' from my address when replying by email.
> >
>
>
> - Franc Zabkar
> --
> Please remove one 's' from my address when replying by email.
Facebook
Twitter
Instagram