Laptop's bezel is coming out a bit

Status
Not open for further replies.
Jan 4, 2019
1
0
10
Hello,
I have got a ASUS FX553VE and it has been good for the past 6 months but now I have noticed that the bezel in down right corner is coming out a bit and its looking really weird. I tried to put it in but everytime it just comes out so what do you guys think I should do?

Also the laptop has also been acting a bit strange as in idle sometimes it hits 60-70 degrees and it never did that before. Below pictures are how it looks:

https://imgur.com/Q9UYpHC
https://imgur.com/9ao5G5w
 
Solution
Nothing you can do there aside from replacing the bezel if it does not push in. Could be a broken clip, could be the plastic just warped through heat or something else.

If it's in warranty, contact ASUS support. If it's not, up to you if you want to bother with finding another bezel or just live with that.

For the temps, make sure system is clean, fans are clean, you may want to re-do the heatsink with new thermal paste. 70 on idle is pretty high. Again if it's in warranty, first thing is contact ASUS.
Nothing you can do there aside from replacing the bezel if it does not push in. Could be a broken clip, could be the plastic just warped through heat or something else.

If it's in warranty, contact ASUS support. If it's not, up to you if you want to bother with finding another bezel or just live with that.

For the temps, make sure system is clean, fans are clean, you may want to re-do the heatsink with new thermal paste. 70 on idle is pretty high. Again if it's in warranty, first thing is contact ASUS.
 
Solution
Status
Not open for further replies.