Last 3 Multi Williams kits left

Toggle sidebar Toggle sidebar
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

I will not be reordering and Im not sure of the future of this kit from
Clay.

Order direct from the site.

www.phoenixarcade.com
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

Im now down to one last MW Clays kit.

Yes I have the art in stock and Steve you should have recieved your
tracking number on Tuesday.

Bezels are running very low and Im not sure I want to rerun them again.
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

and now Clay will make more since demand is high! ;)
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

<citznfish@gmail.com> wrote in message
news:1111693798.071601.31380@l41g2000cwc.googlegroups.com...
> and now Clay will make more since demand is high! ;)

I do still have quite a few parts sets... I've got a couple orders on my
list to fill, so I'll probably make a small batch in the next couple weeks.
Doing some SW/ESB stuff first for now.

-Clay
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

Clay,
Please make some up! Had I known the stock was getting low I would have
got mine already. I have just been waiting until spring now I am
screwed...........Let us know when and if you make some up.......Thanks
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

Do you still have artwork available?

Mine should be here Monday, but as usual, I'm anticipating f'ing up at least
part of it...

"phoenixarcade.com" <azarcadegames@cox.net> wrote in message
news:1111676277.162933.177080@g14g2000cwa.googlegroups.com...
>I will not be reordering and Im not sure of the future of this kit from
> Clay.
>
> Order direct from the site.
>
> www.phoenixarcade.com
>
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

Thanks Darin, yes I did get get tracking number on Tuesday (the package is
scheduled for Monday (dang holiday)).

Ok... I hopefully won't damage the bezel....

This is my first real "restoration".... that is, where I've actaully
bothered to put side-art on a machine (I have lots of black cab's where they
were just 2 far gone) and/or the "natural" look (my wife acutally likes
machies that look like they've been played before rather then restored
machines).

If things go as they usually do for me, at least one of the side art pieces
will end up up-side-down...

Thanks,

steve

"phoenixarcade.com" <azarcadegames@cox.net> wrote in message
news:1111685634.158786.308150@o13g2000cwo.googlegroups.com...
> Im now down to one last MW Clays kit.
>
> Yes I have the art in stock and Steve you should have recieved your
> tracking number on Tuesday.
>
> Bezels are running very low and Im not sure I want to rerun them again.
>
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

Clay,

FYI the pricing on your site is screwy... the williams page says $140 and
the order page says $149.

steve

"Clay Cowgill" <c.cowgill@comcast.net> wrote in message
news:suCdnaer3466sd7fRVn-1Q@comcast.com...
> <citznfish@gmail.com> wrote in message
> news:1111693798.071601.31380@l41g2000cwc.googlegroups.com...
>> and now Clay will make more since demand is high! ;)
>
> I do still have quite a few parts sets... I've got a couple orders on my
> list to fill, so I'll probably make a small batch in the next couple
> weeks.
> Doing some SW/ESB stuff first for now.
>
> -Clay
>
>
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

> FYI the pricing on your site is screwy... the williams page says $140 and
> the order page says $149.

Ah, good catch. The orderform is correct. I raised the price $10 a year or
so ago when I switched over to just just buying parts in small quantities as
needed.

-Clay
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

Clay,
Mine is now locked on one game (Robotron) it sits there and wont let you
start or select games. Like the control panel is not there. I've had it
running in one location for a few years now with no problems. I plugged it
in and now I have this problem. Did my widget board die? What do you think
is wrong with it?


"Clay Cowgill" <c.cowgill@comcast.net> wrote in message
news:N-qdnTwcZqtKwt7fRVn-sQ@comcast.com...
>> FYI the pricing on your site is screwy... the williams page says $140 and
>> the order page says $149.
>
> Ah, good catch. The orderform is correct. I raised the price $10 a year
> or
> so ago when I switched over to just just buying parts in small quantities
> as
> needed.
>
> -Clay
>
>
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

"Ms Pac Man's Mother-In-Law's cousin's friends aunt Nikki"
<phillyNOarcadeSpam@comcast.net> wrote in message
news:qemdnZXTepHFFd7fRVn-vA@comcast.com...
> Clay,
> Mine is now locked on one game (Robotron) it sits there and wont let
you
> start or select games. Like the control panel is not there. I've had it
> running in one location for a few years now with no problems. I plugged it
> in and now I have this problem. Did my widget board die? What do you think
> is wrong with it?

I'd say to check the +5VDC supply voltage at the CPU daughterboard just to
make sure that hasn't drifted down over the years. If that's a good solid
~5.1-5.3V or so, I'd try to reenable the menu (the clip from the manual that
Steve posted). If it still doesn't go, I'd say to check the quality of the
connector on the widget board (both the connection from the CPU board as
well as the wiring harness). Make sure that the ground from the control
panel inputs is the same potential as the ground on the widget board. If
the pins on the CPU board connection to the widget board are scraggly
looking (frayed like an old toothbrush and nicked up) I'd replace them with
a new 10x2 header. (Jameco or other places sell them.) If none of that
works, it's possible something fried and it needs repair...

-Clay
 
G

Guest

Guest
Archived from groups: rec.games.video.arcade.collecting (More info?)

From the manual:
By default, the "Menu System" is the default, but if you choose another game
you will not be able to see the menu on power-up. To get the "Setup" menu
back, you need to set the "Auto/Up" switch on (up position) your game and
reset the machine (Press P1 and P2 start simultaneously). That will enable
the "Setup" menu again. You must select the "EXIT MENU" item to exit this
menu.

"Ms Pac Man's Mother-In-Law's cousin's friends aunt Nikki"
<phillyNOarcadeSpam@comcast.net> wrote in message
news:qemdnZXTepHFFd7fRVn-vA@comcast.com...
> Clay,
> Mine is now locked on one game (Robotron) it sits there and wont let you
> start or select games. Like the control panel is not there. I've had it
> running in one location for a few years now with no problems. I plugged it
> in and now I have this problem. Did my widget board die? What do you think
> is wrong with it?
>
>
> "Clay Cowgill" <c.cowgill@comcast.net> wrote in message
> news:N-qdnTwcZqtKwt7fRVn-sQ@comcast.com...
>>> FYI the pricing on your site is screwy... the williams page says $140
>>> and
>>> the order page says $149.
>>
>> Ah, good catch. The orderform is correct. I raised the price $10 a year
>> or
>> so ago when I switched over to just just buying parts in small quantities
>> as
>> needed.
>>
>> -Clay
>>
>>
>
>
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom