Led backligth monitors

[jpinto]

Dear All,
For a coming project I will need borderless led backlight monitors with size between 24 and 32 inches. The 32 inches size is the most important. As I need to install two monitors back to back they need to be as thin as possible thus led backlight and as I need also to install them side by side that's why they should be borderless. Both assemblies will connect to a pc the back to back unit will have the same image on both monitors via HDMI port or VGA port using a video splitter and the side by side unit will receive the image from a pc as well via the HDMI or the VGA port and it will have a video controller so I can have one pc image on two monitors. Does anyone know where I can find this kind of monitors?
Regards,
Joaquim

 

[jaguarskx]

There are no "borderless" monitors. There is always a bezel of some varying width which is necessary to hold the monitor in place. Additionally the led backlights are "side firing" rather than directly behind the LCD display. Therefore, the led backlight is held in place by the bezel itself. That is why LED monitors are thin.

Additionally, there are no monitors above 30" (2560x1600 resolution). There is a category called "large format displays" which are large 1920x1080 or 1920x1200 monitors, but they are generally at least 37" and do not LED backlight. They are meant for boardroom presentations.