I just flashed the bios with the same update.. then changed the ram and now it says it can’t detect the CPUswitch the RAM to slots 2 and 4 not 1 and 3.
WOuld you recommend updating to the latest bios? It is a betaswitch the RAM to slots 2 and 4 not 1 and 3.
Update: updated bios to latest beta, EZ debug lights are all off but still getting nothing in the monitor?? Please helpswitch the RAM to slots 2 and 4 not 1 and 3.
done but now some pins are showing.. is that okay View: https://imgur.com/gallery/OCdhJ0DMaybe not related to your issue but you need to secure that nvme drive on the motherboard.... it might not be making contact with the pins hence the system not working correctly.
done but now some pins are showing.. is that okay
IT was the the same as before.. I even tried plugging it in to my tv and changed the cable.. there are a few pins on the bottom that are vacant, I’ll send some picturesYes that is normal. Did the system start up fine or same issue? All power cables plugged in? (power cable to the motherboard if it requires it)
View: https://imgur.com/gallery/jw63RT3Yes that is normal. Did the system start up fine or same issue? All power cables plugged in? (power cable to the motherboard if it requires it)
Yes that’s he cpu plugThat's fine, they're just pins for the header and usb ports on the case itself. Do you have a power cable plugged into the 4x2 (8pin) plug up top to the left of #7?
Could it be the gpu? It has a 8 pin then a 6 pin.. my psu only came with 6+2 pins though so 2 of the pins aren’t in anythingThat's fine, they're just pins for the header and usb ports on the case itself. Do you have a power cable plugged into the 4x2 (8pin) plug up top to the left of #7?
I don’t think it is touching.. View: https://imgur.com/gallery/LGKromHLooks like the motherboard standoffs are missing.
Video card is on an angle and motherboard case panel does not line up with opening.
https://www.google.com/search?q=mot...pMLkAhUGTN8KHWawANMQ_AUIEygC&biw=1920&bih=963
I have the Corsair spec-delta carbide series and Corsair TX 650W psuCan't see in that video.
What case do you have?
Most require standoffs to be installed.
Some have raised bumps in some places but require a few to be installed. Depending on motherboard size.
There are hundreds of solder points on the back of the motherboard. it only take one touching to cause a no boot or worse fries the motherboard if you have a cheap power supply.
Stand offs are a most
Power supply is great but case needs standoffs installed.
You should have a small box with screws ,wire ties, stand offs etc.... somewhere that came with it.
YEs I did that when installing the motherboardhttps://www.corsair.com/medias/sys_...2910/-CC-9011166-WW-Gallery-SPEC-DELTA-07.png
in this photo you have the motherboard tray with instructions where to install standoffs for different size motherboards.
Each hole is marked with A/M/I or a combination .
You need a standoff in all holes marked "A"
Could it be the gpu? It has a 8 pin then a 6 pin.. my psu only came with 6+2 pins though so 2 of the pins aren’t in anything