Sep 16, 2021
2
0
10
0
Having a problem with my case fans. Connected fans to controller and checked all wires like 5 mins ago and AI Suite 3 says that I can't change speed of these case fans and they're stuck around 1300rpm.
Tried to change between DC and PWM modes and nothing changes.
 
Last edited:
Sep 16, 2021
2
0
10
0
Basic fans that come with LANCOOL II are DC 12V and as controller i use Lamptron SP901 and i have ran Fan Tuning throught AI Suite. I have tried in DC and PWM mode but nothing changed. Controller takes sata power in and is connected to motherboards case fan 3 (not sure) connection. Controller also connects to ARGB connector. As motherboard I use Asus TUF Gaming - Plus. When Jimm's (local pc part store) setup my water cooling and asus aura it worked fine but after i updated bios it ran in trouble identifying that controller in AI Suite. Also had to reconnect sata power to the controller once already as it had disconnected. If i could i would add picture from AI Suite here but for some reason i cant.
 

ASK THE COMMUNITY

TRENDING THREADS