[SOLVED] lian li o11 dynamic evo Front Panel Connectors

[jasonbirder]

The Connectors are integrated into a single plug rather than individual pins...
Unfortunately the block doesn't match the Front Panel Socket on my Gigabyte Z690 AORUS ELITE DDR4 ATX LGA1700 Motherboard...the socket is much bigger and with more pins!
There's one orientation that will allow it to be plugged in (and one only) should I just slot it in that way...even though that means lots of pins in the socket are left bare? At least 2 unconnected Pins are for a front panel speaker (which I don't think) my case has...

 

[Lutfij]

Might want to parse a picture for both ends, to confirm what you should do(or not do) before you end up with broken/bent pins which'll haunt you later down the road. You can host your images on Imgur or their ilk and parse the link here for us to see.

Edit:
Seems like Lian-Li went with a unified approach like the front panel audio connector however there should be a breakaway cable included in the box to cater for motherboard's that don't have the same pinout as the blocked connector on the case.

 

[jasonbirder]

I'll go grab those now!

 

[jasonbirder]

https://photos.app.goo.gl/QgufednngCngiHc28
https://photos.app.goo.gl/T9TXWoHyKnFMEsZi6
There's the connector and socket!

 

[Lutfij]

Using this as reference;
https://photos.app.goo.gl/T9TXWoHyKnFMEsZi6
You should connect the block starting from the right edge of that housing, (bottom right pin is pin 1), the blank connector should terminate next to the PWR - (-ve) pin.

 

[jasonbirder]

Using this as reference;
https://photos.app.goo.gl/T9TXWoHyKnFMEsZi6
You should connect the block starting from the right edge of that housing, (bottom right pin is pin 1), the blank connector should terminate next to the PWR - (-ve) pin.

Thanks!