G
Guest
Guest
Archived from groups: alt.internet.wireless (More info?)
I have the BEFW11S4 Linksys Wireless Router with one computer wired to
it and another trying to access it through its wireless capabilities.
The cable modem is plugged into the WAN port on the router. When the
Linksys setup utility was installed on the laptop [the wireless
machine], configured, and restarted, it appeared as if it connected
just fine. It said that it had a good signal and had connected to the
right SSID and everything. However, it cannot actually see the router
[192.168.1.1] and it cannot get an IP address. Does anyone have any
suggestions?
I have the BEFW11S4 Linksys Wireless Router with one computer wired to
it and another trying to access it through its wireless capabilities.
The cable modem is plugged into the WAN port on the router. When the
Linksys setup utility was installed on the laptop [the wireless
machine], configured, and restarted, it appeared as if it connected
just fine. It said that it had a good signal and had connected to the
right SSID and everything. However, it cannot actually see the router
[192.168.1.1] and it cannot get an IP address. Does anyone have any
suggestions?