Question Little help with a case

[SeanTPcGaming]

i got a hp pro desk 600 g1 for a steal and i upgraded my mem to 26g 3.3ghz CPU i got a 2g GPU (not what i wanted) so i got my self a rx580 xxx BUT this hp only has a 240w psu so i got a 600+80 psu......and then it happened.... fed-ex dropped my psu off and i realized after my morning wake in bake....this psu is NOT gonna fit....LOL.... the GPU is fit ...TIGHTLY.... but its a min 500w PSU SOOOOO... my question is this i have a HP 18e7 MoBo i am trying to figure out a case that is compatible with my mobo a mid to large size tower how can i tell if my mobo will fix a ATX / MiniATX /Uatx...lol i have no idea what this mobo fits into

somthing like this??


This case's internal layout is optimized for expansion, featuring 2x 2.5" & 3x 3.5" drive bays and 4x expansion slots. You can install a Micro ATX motherboard from Intel or AMD.

 

[Ralston18]

The case will need to support "small form factor" (SFF).

References:

https://support.hp.com/us-en/document/c03846648

https://www.cnet.com/products/hp-prodesk-600-g1-core-i5-4570-3-2-ghz-monitor-none-series/

However, verify that I correctly identified the source computer and corresponding specs.

And also verify that the other planned components will also fit in the case.

 

[SeanTPcGaming]

yes its SFF and those specks are close

i5-4590 3.3ghz cpu
msi GeForce gt 710 2 gb gpu
500g hdd
26gb memory
64bit win 10

and that case for exsample in that pic is my problem...i need a bit more clearance in order to get my 600+80 psu and the new rx580 8b xxx gpu .... so with a case that has the room and can fit my motherboard in it i just figure ill swap that whole shabang into my new case....when i figure out what to get lol ive also been on hp site and know the hight specs and what not but for instance

Deepcool Tesseract Mid-Tower Case

Compatibility

Motherboard Support	ATX, Micro-ATX, Mini-ITX <-------this is what i mean??
External Drive Bays	2 x 5.25"
Internal Drive Bays	4 x 3.5" 3 x 2.5"
Expansion Slots	7 x Full Height
Maximum GPU Length	12.2" / 31 cm
CPU Cooler Height	6.5" / 16.5 cm
Supported PSU Size	ATX

just as an eq not getting that case LOL

 

[SeanTPcGaming]

found this on HP


Form Factor

• uATX
• Dimensions: 24.4 cm (9.6 in) x 24.4 cm (9.6 in)

so my motherboard i think thats what im looking for the uATX would be the style case i need correct me if im wrong please