Locating Devices on a home network.

[agate2]

I have a home network which has a modem, 5 port gigabit switch and a wireless router. Configuration is as follows
Zyxel Q100 modem for CenturyLink incoming Internet connection
Netgear GS105v4 5 port Gigabit switch
Incoming connections is from Zyxel Modem
1 outgoing connection to a Windows XP Desktop
1 Outgoing connection for a Printer
1 Outgoing connection to Netgear WNDR3700 wireless router
Netgear WNDR3700 wireless router- Following are the wireless connections
1 Windows 8 laptop
1 MacBook pro
1 IPhone
1 IPhone
I am looking for free shareware utility software which will map this network and let me know the IP addresses of each device.

 

[dustinhunt78]

Here you go! This should do you right.

http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CDcQFjAA&url=http%3A%2F%2Fpcsupport.about.com%2Fod%2Ffixtheproblem%2Fht%2Fidentify-network-hardware-ip-addresses-local-network.htm&ei=SyAlU5D_BsOb0AGl4YDICw&usg=AFQjCNHD2BpyRNSVhgzsjSzILgxuXyMD5g&bvm=bv.62922401,d.dmQ

 

[getochkn]

AdvancedIP Scanner. Works great

 

[dustinhunt78]

AdvancedIP Scanner. Works great

Awesome! Another solved problem.

 

[agate2]

AdvancedIP Scanner. Works great

I tried the AdancedIPScanner, It works good. It shows all the devices connected to the Netgear GS105 switch, unfortunately it does not show any devices connected to the router.
Is there any way it can show devices connected to the Router?

 

[bill001g]

You actually have 2 router the zyxel is actually a router which means you have 2 different networks.

Since switch is on the internet side of the netgear the netgear is preventing you from scanning because of nat.

You are going to have to do this from the lan side of the netgear and you are also going to have to scan both subnets. You can do it from the lan->wan but but from wan ->lan