Looking a a good airflow oriented case.

[Danny P]

Hi, I'm looking for a new case for my system. Some criterias are:
Must have good airflow
Fit hyper evo212
Mid tower is preferem
Must have 5.25 bay supported( for fan controller)
$150 budget
I have a 980ti and a mATX board if that helps. Right now I'm looking at the air 540 but still not sure.

 

[scout_03]

go for it and you wont need a fan controller with all the fan it have and the way they made it .

 

[Danny P]

go for it and you wont need a fan controller with all the fan it have and the way they made it .

Yeah, it looks like a really good case. I need tje fan controller since I have a bunch of better fans lying around. Also, do you know if for the hotswap drive at the bottom of the case, does my mobo have to support hotswap, and how do you even install it?

 

[scout_03]

the hot swap it is at the bootom look the link for the case and yes mobo need to be able to do hot swap but i would try the case as it is for cooling and had only fan if needed .

 

[Danny P]

the hot swap it is at the bootom look the link for the case and yes mobo need to be able to do hot swap but i would try the case as it is for cooling and had only fan if needed .

Aw, my mobo cant do hotswap. Anyway, is there a way to remove the hotswap ports and just use traditional sata, bc i would love to show off my 2 drives.

 

[scout_03]

check the case link you could use regular settings for hdd and not using the hotswatable connector in the case .

 

[Danny P]

check the case link you could use regular settings for hdd and not using the hotswatable connector in the case .

Just got the case, it's not exactly hotswap but rather a pass-through. It just basically 2 sata cables, one goes to your mobo and one to the PSU sata, so I'm very please (less cluster). Compared to me old case (corsair 200r), gpu temp goes down about 5-6 degree and that is with lower gpu fan speed than before! Loving this case so far exept for it huge footprint and lack of more 3.5 hdd support (I only have one right now, but still...)

 

[scout_03]

for extra usb 3.0 from the back and front you could use this http://www.amazon.ca/Express-PCI-E-Adapter-Front-Hi-Speed/dp/B00DHCC5II