G
Guest
Guest
I have been looking for a case that I can mod to contain both my entire system (3 5.25" drives plus floppy and 3-4 HD's) plus the entire water cooling system. This consists of a enheim 1048 pump plus resevoir, 1/2" tubing, a heater core and two 120mm fans. I was thinking that the easiest way to mount this would be a dual blowhole which would mean sacrificing the top two 5.25" bays but would be much easier (read😛ossible) than trying to do the same thing in my PC-60.
The two cases I have been looking at are the PC-70 and the Antec SX1200 full tower cases. If anyone could suggest other cases or relate links, experience installing a full watercooling rig in these cases, etc., it would be much appreciated.
Addendum: I have also been looking at the Enermax FS-981. While this thing is a monster, it's got a ton of room in it for any mods I might _ever_ want to make plus a couple of nice spaces for a hefty radiator.
Thanks!
<P ID="edit"><FONT SIZE=-1><EM>Edited by cdrikari on 11/26/01 11:33 PM.</EM></FONT></P>
The two cases I have been looking at are the PC-70 and the Antec SX1200 full tower cases. If anyone could suggest other cases or relate links, experience installing a full watercooling rig in these cases, etc., it would be much appreciated.
Addendum: I have also been looking at the Enermax FS-981. While this thing is a monster, it's got a ton of room in it for any mods I might _ever_ want to make plus a couple of nice spaces for a hefty radiator.
Thanks!
<P ID="edit"><FONT SIZE=-1><EM>Edited by cdrikari on 11/26/01 11:33 PM.</EM></FONT></P>
