- Dec 11, 2018
- 5
- 0
- 10,520
Hello.
Finally I've got my Hackberry Pi Zero at home and I've disassembled it :
https://github.com/ZitaoTech/Hackberry-Pi_Zero
Let's give a look at the pictures below. This is how the display (4" 720X720 TFT) is connected to the board (Raspberry Pi Zero 2W) :
https://ibb.co/VbS0b7M
I want to remove that display and to use one HDMI-USB-C display of the same inches (or maybe some less inches). In the past I've bought this display :
https://www.waveshare.com/8hp-caplcd-monitor.htm
what's good about it is that it is compact,it does not have an HDMI driver board separated and it works out of the box with FreeBSD.
For sure I can't use that 8 inch display with the Hackberry Pi Zero. I need a 4 inches and the proper size.
I'm sure that in this case,FreeBSD will be able to boot and run (yeah,that's my ultimate goal : install,boot and run FreeBSD on the HackBerry Pi Zero).
The dimensions of the default display used for the Hackberry-Pi_Zero are :
width = 7.5 cm
height = 8 cm
the new display should have more or less those dimensions and it should fit inside the frame of the "phone" :
https://ibb.co/GvKvHKzJ
So. To recap : I'm actively looking for a squared HDMI / USB-C display that can match those dimensions.
Please share some nice models. I've googled a lot already but I didn't find what I need,yet.
Very thanks.
Finally I've got my Hackberry Pi Zero at home and I've disassembled it :
https://github.com/ZitaoTech/Hackberry-Pi_Zero
Let's give a look at the pictures below. This is how the display (4" 720X720 TFT) is connected to the board (Raspberry Pi Zero 2W) :
https://ibb.co/VbS0b7M
I want to remove that display and to use one HDMI-USB-C display of the same inches (or maybe some less inches). In the past I've bought this display :
https://www.waveshare.com/8hp-caplcd-monitor.htm
what's good about it is that it is compact,it does not have an HDMI driver board separated and it works out of the box with FreeBSD.
For sure I can't use that 8 inch display with the Hackberry Pi Zero. I need a 4 inches and the proper size.
I'm sure that in this case,FreeBSD will be able to boot and run (yeah,that's my ultimate goal : install,boot and run FreeBSD on the HackBerry Pi Zero).
The dimensions of the default display used for the Hackberry-Pi_Zero are :
width = 7.5 cm
height = 8 cm
the new display should have more or less those dimensions and it should fit inside the frame of the "phone" :
https://ibb.co/GvKvHKzJ
So. To recap : I'm actively looking for a squared HDMI / USB-C display that can match those dimensions.
Please share some nice models. I've googled a lot already but I didn't find what I need,yet.
Very thanks.
Facebook
Twitter
Instagram