Looking for case fan setup suggestions

[VinnyVincent]

I'm getting a Zotac 1060 mini for Christmas and I am reading that they tend to run hot. The processor is a G4560 and right now my PC only has the 120mm fan that's built into the power supply.
My case has space for two 120mm side fans, and one 80mm exhaust fan.

The room is air conditioned and the processor never really gets over 50 degrees with the current setup(only a power supply integrated fan)


I prefer to shop locally, but am willing to order online, if need be. II have no idea how much I should be looking to spend on a decent quality fan...



Here's what I was looking at:

For the 120mm:

-X2 enermax marathon for 24 dollars total:
http://
-2 pack of corsair AF120 for 20 dollars total:
http://

Of these two which are better? I'm not worried about LED lights. My case is not see through. Just want a fan that will last. How about this cheaper one?
http://
At 12 dollars total for two, I wouldn't exactly be saving a fortune by selecting them over the corsair...


For the 80mm:

Enermax
http://

or

Antec
http://



Do these look like decent fans, or should I be looking for a higher price range?

 

[scout_03]

fro the 120 mm use the corsair kit and for the 80 mm use this one it have the highest cfm output http://www.microcenter.com/product/367981/80mm_Case_Fan

 

[VinnyVincent]

Thanks Scout, Should I set any up as intake fans?
The side panel has two 120mm mounts stacked on top of each other, directly over the motherboard, and there is a rear upper 80mm mount, which is just below the top mounted PSU. Unfortunately there's no mount in the front for any fans.

I was thinking of making the lower 120mm an intake fan and setting all others as exhaust. Does that sound best?

 

[scout_03]

what is case name and model the mini is a gpu .

 

[VinnyVincent]

Diablotek CPA-0170 Black SGCC Steel Diamond ATX Mid Tower Computer Case 400W Power Supply

http://

Just FYI- I already swapped out the power supply it had with it to an EVGA unit.

 

[scout_03]

that is your case manual so you could also get a 120 mm in the back and 2 of them in the front http://diablotek.com/v2.0/phocadownload/userupload/CPA-0170_user%20manual.pdf seee these for fan as a set they also come in black that what i have in my system https://cougargaming.com/us/products/fans/turbine_fan_4pcs/

 

[VinnyVincent]

OH wow, I guess the review video I saw missed that too! That's cool they even have a spot for a fan on the bottom!
So it looks like there's actually space for five 120mm fans. 2 on the side, two on the front and one on the bottom.
With that pack of four fans that you linked and the 80mm as an exhaust up top, how would you configure the four 120mm fans?

 

[scout_03]

there is no spot for top fan except the psu that goes there so 2 in front air in and back air out .

 

[VinnyVincent]

Thanks a lot Scout, you've been a huge help. I'm going to go ahead and order that 4 fan kit, thats a good price.
I might not use the fourth fan, but it's nice to have as an extra, or if I decide to put in a side fan, since my primary concern is keeping the GPU cool. My SSD hard drives won't get too hot I don't think

 

[scout_03]

if it is in the middle in front of case fan should stay around 29 to 35 c max .