Question Looking for something that possibly doesn't exist(yet)....

toshibitsu

Distinguished
I am looking for an ITX case that will fit an EVGA 3090 FTW3 Ultra , an EVGA Supernova 1000w PSU and has at least 1 USB-C connector on the front of the case.

thanks for any help!
 
Alot of cases will require an SFX form factor PSU which are available in 1000 watt, although 1000 watt PSU are generally overkill for most setups. These should work, just double check GPU measurements and leave little extrea for tolerance.

https://www.nzxt.com/products/h210-matte-white



https://www.silverstonetek.com/product.php?pid=953&area=en

The Silverstone case allows the use of a Standard ATX PSU so it might be your best bet.
 
Last edited:

toshibitsu

Distinguished
It's a spare 3090 and a spare 1000w PSU that I already have on hand. Hoping for something small as the area where I want to potentially put a PC does not have much room.
I did check that Silverstone case and it says it supports upto 150mm standard PSU... this one is 187.96mm. That and my other issue is I have 2 heatsinks available.. a DeepCool Assassin III or a Corsair Capellix H100i(seems neither would fit in that case).

I'm thinking I may have to go with a MicroATX case instead.
 
It's a spare 3090 and a spare 1000w PSU that I already have on hand. Hoping for something small as the area where I want to potentially put a PC does not have much room.
I did check that Silverstone case and it says it supports upto 150mm standard PSU... this one is 187.96mm. That and my other issue is I have 2 heatsinks available.. a DeepCool Assassin III or a Corsair Capellix H100i(seems neither would fit in that case).

I'm thinking I may have to go with a MicroATX case instead.

Yeah you can find fairly small Micro ATX cases and they will generally have alittle more room inside.
 

Karadjgne

Titan
Ambassador
Alot of cases will require an SFX form factor PSU which are available in 1000 watt,
There's only one. The Silverstone 1000w SFX, released just over a couple months ago, and it's SFX-L, so a bit longer than normal SFX. Otherwise everyone else is looking at 850w max.

There's very few mITX/SFF cases that'll fit a standard ATX psu (with any room to move, and only the 140mm versions) and no SlimFF that will.

There aren't any mITX I can think of that'll support a 3090, it's simply too long and/or too many slots. Most mITX only support 2x slot, some can handle 2.5x slot, few can handle 3x slot and those that do are either too short or don't support an ATX psu.

Op, unless you plan on building a custom case, for a commercially available case you'll pretty much need mATX to fit all your requirements.
 

ASK THE COMMUNITY

TRENDING THREADS