I just acquired some old hardware for cheap and I am looking to upgrade to play some late 2000s games.
Dell G43t-DM1 C:A00 This is a very late LGA 775 board, manufactured around 2010/11.
Intel Pentium E6700 3.2ghz 65w tdp. It has a basic cooler aswell.
6gb ddr3 These sticks are unmatched, but this system came from the factory like that so it works fine with current configuration.
300w Hipro PSU.
I cannot find Dell's documentation on processor upgrades for this motherboard, perhaps since I do not know what system this was pulled from.
Looking on Intel's website, the G43 chipset supports up to the QX9650, but these go for stupid prices. https://ark.intel.com/content/www/u...82g43-graphics-and-memory-controller-hub.html
I see that the Q8400 and Q6600 are also supported, and these are inexpensive.
Do you think a 95w Q8400 or 105w q6600 will work in this board? It should theoretically work, but i am worried Dell TDP limited the board or something. Does anyone know how to check?
Also, I have heard of using tape on 2 contacts on the CPU to overclock q6600s to 3ghz. Does this work with the Q8400? If not, i will buy the q6600.
View: https://www.youtube.com/watch?v=5rsFVg3s3G0
Dell G43t-DM1 C:A00 This is a very late LGA 775 board, manufactured around 2010/11.
Intel Pentium E6700 3.2ghz 65w tdp. It has a basic cooler aswell.
6gb ddr3 These sticks are unmatched, but this system came from the factory like that so it works fine with current configuration.
300w Hipro PSU.
I cannot find Dell's documentation on processor upgrades for this motherboard, perhaps since I do not know what system this was pulled from.
Looking on Intel's website, the G43 chipset supports up to the QX9650, but these go for stupid prices. https://ark.intel.com/content/www/u...82g43-graphics-and-memory-controller-hub.html
I see that the Q8400 and Q6600 are also supported, and these are inexpensive.
Do you think a 95w Q8400 or 105w q6600 will work in this board? It should theoretically work, but i am worried Dell TDP limited the board or something. Does anyone know how to check?
Also, I have heard of using tape on 2 contacts on the CPU to overclock q6600s to 3ghz. Does this work with the Q8400? If not, i will buy the q6600.