Hi all, this is my rig at the moment. I7 3770k, 6gb ram, gtx 750 1gb 450watt psu. Want to know what gpu to upgrade to so I can play most if not all newest games on ultra on 1920 res. By the way im upgrading my ram to 8gb.
Hello... I would suggest looking for 25 or more AMPs on the +12VDC PS rail. And picking the Video card out first... because of the number of 6-pin and 8 pin power connectors on them... they vary by maker/model... some need two 6's or two 8's... or one of each? this way you will be ready for a fast install. B /
Hello... I use this chart to compare price and performance... your MB/CPU should be able to run most of the GPU's on top of the list... But your +12Vdc current rating of your Power Supply will need to be checked for the higher output current needed for some of these cards... your GTX750 was only about 60watts/5amps... some of theses cards will need much more B /
Hello... There will be a electrical spec/label on the PS it's self... open the case and snap/post a digital of it... There is more than One Voltage used in a Power supply... and they get added up together for a product Number/name... you will be using the +12Vdc from it for your CPU and New GPU. Also you will need some 6 or 8 pin connectors to connect to these GPU's. So it's a good thing to Look before you Buy, and have all your electrical verified before.
Couldn't manage to upload a snap not sure how but this is the following info on the label. RAIDMAX ATX12V Power. RX-450k (Ky550ATX) ATX 12V DC Outputs. +3.3v, +5v, +12v, -5v, -12v, +5vsb
10A/5A, 28.0A, 34.0A,210A,0.5A,0.8A,2.0A,450W
Hello... THx... you have to use an IMG uploading site and then post the link/address here B )
Basically for the math of it I need the PS +12vdc current rating, and the CPU and GPU to be used.
That's cutting it close. If you can get a better power supply, i'd pair your i7 cpu with a gtx 1070. If you can't replace the power supply, the best gpu upgrade I can recommend is a gtx 1060, as it has a low tdp of only 120watts.
Hello... I would suggest looking for 25 or more AMPs on the +12VDC PS rail. And picking the Video card out first... because of the number of 6-pin and 8 pin power connectors on them... they vary by maker/model... some need two 6's or two 8's... or one of each? this way you will be ready for a fast install. B /