[SOLVED] Loop booting after making changes in BIOS (Cannot reset)

Jan 12, 2020
3
0
20
1
Hi guys

So after a few power outages that corrupted my NVMe boot file, I formated the drive to install a new windows at which point in the installation at "finishing up" the setup errors and needs to restart, so I got this thread at where i should change settings in secure boot and key management because I thought it might be my BIOS settings not helping with the NVMe and installations, after I made the changes and saved, the PC just keeps starting up and shutting down.

I tried clearing my CMOS by holding a srewdriver at the 2 pins and removing the battery for 5 minutes but nothing, any help?
 
Jan 12, 2020
3
0
20
1
Hi guys, yes I removed the NVMe, took it to a professional I. T shop for a damage report, seems like mother board chip shorted, dont know which one will wait for full report.
 
Jan 12, 2020
3
0
20
1
Hi guys, yes I removed the NVMe, took it to a professional I. T shop for a damage report, seems like mother board chip shorted, dont know which one will wait for full report.
 

ASK THE COMMUNITY

TRENDING THREADS