Lose my RAID 5 array in BIOS after overclock

[Ltbest]

Hi Everyone,

Go easy on me - I've searched.

Asus X88a-M and A8-6600K (3.9Ghz)
I've raised the multiplier to 106 (4.1-ish) and all is well... up to here. I'm using the ASUS on-board RAID controller.

Once I hit 107, at startup, the RAID array reports "Not Present." I saw a post from 2004 where someone asked if they 'locked the AGP/PCI' on the motherboard. I swear there is nothing like that in my Asus BIOS and not a single post anywhere on Al Gore's internet that mentions this effect. I've played with some other settings and no matter what the RAID disappears.

Anywhere to start looking? Pretty much a noob at overclocking but I've been reading so I know words but not concepts yet.

Thanks for taking a minute to help.

 

[popatim]

106/107 isn't the multiplier; thats the FSB and its no wonder you're losing the raid. I'm surprised you haven't lost other functions too.

 

[scuzzycard]

The reason you buy a K-series is so you don't have to mess with the BCLK. Put it back to 100 and set the *multiplier* to 41.

 

[Ltbest]

Thank you Scuzzycard. I tried adjusting the multiplier and I got it to 4.3 Ghz and didn't lose the RAID!!