Loud noise coming from my laptop

[westernmantin]

Hello,recently my laptop started making some weird buzzing noises and freezes in between Dell logo and windows logo.This happens on the first boot of the day and I have to restart it a few times until there's no sound coming out. If it doesn't make the sounds = it will boot,if it makes the sound = it won't boot.As I mentioned,this happens only when I start my laptop after not using it for a few hours.If it goes through the booting process the noise won't appear until the next time I start my pc.Already double-checked if the screws around the cooler/heatsink are tight

 

[Phillip Corcoran]

Might be worth be testing the hard drive to see what it's state of health is. Use the drive maker's own diagnostic software for DOS which loads from a bootable CD (you can't test the system drive properly with Windows-based software).

For WD drives, the link to the CD image is on this page: http://www.smartestcomputing.us.com/topic/63494-looking-for-western-digital-data-lifeguard-iso/

For all other drive brands you can use either SeaTools: http://www.seagate.com/gb/en/support/downloads/item/seatools-dos-master/

or HGST Drive Fitness Test: http://www.hgst.com/support/downloads/legacy-downloads#DFT

To create a CD from a CD image you can use IMGBurn: http://filehippo.com/download_imgburn

 

[westernmantin]

Might be worth be testing the hard drive to see what it's state of health is. Use the drive maker's own diagnostic software for DOS which loads from a bootable CD (you can't test the system drive properly with Windows-based software).

For WD drives, the link to the CD image is on this page: http://www.smartestcomputing.us.com/topic/63494-looking-for-western-digital-data-lifeguard-iso/

For all other drive brands you can use either SeaTools: http://www.seagate.com/gb/en/support/downloads/item/seatools-dos-master/
or HGST Drive Fitness Test: http://www.hgst.com/support/downloads/legacy-downloads#DFT

To create a CD from a CD image you can use IMGBurn: http://filehippo.com/download_imgburn

Thanks alot for the answer.I'll try what you said

 

[westernmantin]

Might be worth be testing the hard drive to see what it's state of health is. Use the drive maker's own diagnostic software for DOS which loads from a bootable CD (you can't test the system drive properly with Windows-based software).

For WD drives, the link to the CD image is on this page: http://www.smartestcomputing.us.com/topic/63494-looking-for-western-digital-data-lifeguard-iso/

For all other drive brands you can use either SeaTools: http://www.seagate.com/gb/en/support/downloads/item/seatools-dos-master/

or HGST Drive Fitness Test: http://www.hgst.com/support/downloads/legacy-downloads#DFT

To create a CD from a CD image you can use IMGBurn: http://filehippo.com/download_imgburn

Hello,I ran Seatools but for Windows(the one for DOS didn't work,i burned the image correctly but a text with a weird font appeared saying something along the lines of "bd:can't open") and the Long Generic test failed for some reason.Also did a chkdsk /R and there was a message that said something like "Replaced bad clusters for memory.dmp".Thanks in advance