[SOLVED] M.2 ssd replacement - blue screen on startup 0xc0000003 error

[Frederikshavn]

Hi all, just replaced the 128gd m.2 ( with os on it) with a Samsung evo 970 plus cloned using aomie.
On startup I get a blue screen with the above error and various f key options.
The thing is these options aren’t clickable and the laptop just stays in a constant shutdown, restart pattern.
Are there any easy fixes...or should I maybe clone the ssd to the already installed hdd..then boot from there.. clone the hdd to the new ssd etc etc?
I really haven’t a clue where to go from here

 

[USAFRet]

What specific make/model was the original 128GB drive?

 

[Frederikshavn]

The standard 128gb
M.2 Slot. 1x 2280 PCIe 3.0 x4 NVMe (32Gb/s)

 

[USAFRet]

What are the exact stpes you took with this clone?
At what point did you remove all the other drives, and at what point did you try to let the system boot from only the new drive?

For a Samsung target drive, try using the Samsung Data Migration, instead of 'aomei'.

 

[Frederikshavn]

I cloned the ssd using an external cabinet... then replaced the factory ssd..

 

[Frederikshavn]

The Samsung software worked! Many thanks !!!