[SOLVED] M.2 SSD

[Dush19]

Hello,
I have a lenovo Sl700 M.2 128G SSD B&M key (https://www.aliexpress.com/item/32818368817.html).

I am looking for a connector to connect on my PCB board.
I found some:
https://www.te.com/usa-en/product-2199230-3.html
https://www.te.com/global-en/product-1-2199230-6.html

1-2199230-4 : M.2 NGFF M.2 Connectors

Get 1-2199230-4 M.2 Connectors specs, pricing, inventory availability, and more from TE Connectivity. Get a sample or request a quote.

www.te.com

let me know if in any of these, can i use for my PCB?
if not then please help me to choose a connector for ssd?
(sorry for posting this question "memory" section)

Thanks in advance

 

[kanewolf]

So you are building a device that you want to add M.2 storage and are asking if that is the correct physical connector ?

 

[Dush19]

yes.

 

[kanewolf]

It seems correct. Generally, this is where engineering models or prototypes come in. Verify everything before the final board layout is sent for production.

 

[Dush19]

Thanks so much for the reply. it seems the B key connector is ok.
just one more question: B&M key is used as PCIE as well as SATA configuration. Pin out diagram of B Key shows that "Config_(0,1,2,3) should be grounded. so my question is, if want to use PCIE what will be the status of Config pin?

you can check this link "https://pinoutguide.com/HD/M.2_NGFF_connector_pinout.shtml"

 

[kanewolf]

Thanks so much for the reply. it seems the B key connector is ok.
just one more question: B&M key is used as PCIE as well as SATA configuration. Pin out diagram of B Key shows that "Config_(0,1,2,3) should be grounded. so my question is, if want to use PCIE what will be the status of Config pin?

you can check this link "https://pinoutguide.com/HD/M.2_NGFF_connector_pinout.shtml"

Not a clue. Not a board designer ...

 

[Dush19]

ok thanks. may be i'll try to ask in some board designer forum .